High rigidity, high-precision type Direct Drive Motor τdisc®︎ DD-S Series pursuing rigidity and accuracy
CKD Nisshin Electrical Corporation Co., Ltd.
About This Product
■ Characteristics
·High precision
・ High response
・ Holding structure
・ Maintenance
・ Simple structure
• Quietness
·High efficiency
・ Speed stable performance
■ Evolution Smart Direct Drive
A direct drive motor is a drive motor that directly binds the load and conveys power/movements without going through the intermediate mechanism such as a deceleration machine or belt. By eliminating the intermediate mechanism, the rigidity of the power transmission system can be improved and the back lasless is high -speed and precise driving. Various benefits are obtained, such as improving mechanical performance, spacing, reducing maintenance, and improving the environment.
■ High rigidity, high accuracy
・ High rigidity type pursuing rigidity and accuracy.
・ Significantly improves m moment rigidity, accrine rigidity, and rotor twist rigidity.
・ Pursuit of positioning accuracy and rotation accuracy.
・ Realize stable operation even if the inner is 2,000 times.
■ POINT
・ Ideal for applications that require stable operation without large Innasha
・ The inclination of the motor due to the ND-S comparison rigidity 5 times the moment is reduced to 1/5
・ ND-S ratio reduction rigidity 2.5 times sinking due to vertical load is reduced by 60%
・ ND-S ratio-rotor torsion-twisted rigidity double control response is improved, and the numbering time is shortened.
■ Application example
・ FPD pasting device
・ FPD inspection device
・ Screen printing machine
・ PE printing press
・ Precision processing device/measuring device
・ X -ray analysis device
・ Waha Dating device
・ Waeha processing device
・ Waeha inspection device
・ Sliver
・ Daikast machine
・ Packaging device
・ Surface polishing device
・ Section device
■ High -precision roll drive: Roll coat, PE printing machine, etc.
・ High -precision positioning
・ Speed stability
■ Ball screw drive: Daikast machine, servo press, etc.
・ High response operation
・ Simplification of equipment by hollow structure
・ Improvement of environmental and safety due to hydraulic les
■ Large Innsha Unpurable turn drive: FPD turning, alignment device, inspection device
・ Stable operation without large Innasha
・ High -precision positioning
・ Simple structure, space saving
■ Continuous rotation drive: surface polishing device, chamfering device, etc.
・ High -precision positioning
・ Speed stability
■ Common specifications
Installation location: It is not in harmful atmosphere such as corrosive gas, grinding oil, metal powder, oil, etc., indoors without direct sunlight
* There are other part numbers.
-
Product
High rigidity, high-precision type Direct Drive Motor τdisc®︎ DD-S Series pursuing rigidity and accuracy
-
Handling Company
CKD Nisshin Electrical Corporation Co., Ltd.
10 Models of High rigidity, high-precision type Direct Drive Motor τdisc®︎ DD-S Series pursuing rigidity and accuracy
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Absolute positioning accuracy ARCSEC | Acquisition accelerator load | Approximately used humidity | Available moment load | Detected pulse | Detection and decomposition ability | Encoder type | Flange type | High -precision specification model | High mm | Impact resistance | Insulated pressure | Insulating class | Maximum torque N.M | Mounting direction | Outer diameter | Parallelity μm | Power supply ACV | Protection grade | Rated current | Rated output | Rated rated rotation speed | Rated torque | Repeated positioning accuracy (at the time of round -trip operation) ARCSEC | Table surface rotation accuracy axial swing (no load) μm | Table surface rotation accuracy radial swing (no load) μm | Used peripheral temperature (℃) | Vibration resistance | cooling method | elevation |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DD160-96-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 22.5 | 85%RH or less, no condensation | 280 | 2097152 | 0.618 | Absolute | Flangeless | NMR-251L04CNN (-p/P3) | 96 (95.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | twenty three | Rotating portion horizontal and upper and lower | 160 | 40 (standard) /20 (parallel degree processing specification) | 200 | IP44 | 3.1 | 251 | Four | Ten | ± 1 | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD160-105-FS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 22.5 | 85%RH or less, no condensation | 280 | 6815744 | 0.191 | Absolute | With flange | NMR-251F04CNN (-p/P3) | 105 (104.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | twenty three | Rotating portion horizontal and upper and lower | 160 | 50 (standard) /20 (parallel processing specification) | 200 | IP44 | 3.1 | 251 | Four | Ten | ± 1 | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD160-146-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 22.5 | 85%RH or less, no condensation | 280 | 2097152 | 0.618 | Absolute | Flangeless | NMR-681L04CNN (-p/P3) | 146 (145.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 62.5 | Rotating portion horizontal and upper and lower | 160 | 40 (standard) /20 (parallel degree processing specification) | 200 | IP44 | Five | 678 | Four | 27 | ± 1 | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 30 (standard) /5 (high -precision specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD250-90-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 22.5 | 85%RH or less, no condensation | 315 | 6815744 | 0.191 | Absolute | Flangeless | DD25-521L02CNN (-p/P3) | 90 (89.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 100 | Rotating portion horizontal and upper and lower | 265 | 60 (standard) /20 (parallel degree processing specification) | 200 | IP44 | 6.3 | 528 | 2 | 42 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD250-138-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 30 | 85%RH or less, no condensation | 450 | 6815744 | 0.191 | Absolute | Flangeless | DD25-102L02CNN (-p/P3) | 138 (137.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 190 | Rotating portion horizontal and upper and lower | 265 | 60 (standard) /20 (parallel degree processing specification) | 200 | IP44 | Ten | 1005 | 2 | 80 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD250-163-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 30 | 85%RH or less, no condensation | 450 | 6815744 | 0.191 | Absolute | Flangeless | DD25-152L02CNN (-p/P3) | 163 (162.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 300 | Rotating portion horizontal and upper and lower | 265 | 60 (standard) /20 (parallel degree processing specification) | 200 | IP44 | Ten | 1507 | 2 | 120 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD400-150-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 44 | 85%RH or less, no condensation | 2000 | 6815744 | 0.191 | Absolute | Flangeless | DD40-322L02CNN (-p/P3) | 150 (149.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 650 | Rotating portion horizontal and upper and lower | 420 | 100 (standard) /20 (parallel processing specification) | 200 | IP44 | twenty four | 3267 | 2 | 260 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD400-200-LS (P5/P3) |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 44 | 85%RH or less, no condensation | 2000 | 6815744 | 0.191 | Absolute | Flangeless | DD40-622L02CNN (-p/P3) | 200 (199.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 1,250 | Rotating portion horizontal and upper and lower | 420 | 100 (standard) /20 (parallel processing specification) | 200 | IP44 | 34 | 6283 | 2 | 500 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD400-250-LS (P5/P3) 1RPS specification |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 55 | 85%RH or less, no condensation | 3000 | 6815744 | 0.191 | Absolute | Flangeless | DD40-702L01CNN (-p/P3) | 250 (249.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 1,750 (1,390) | Rotating portion horizontal and upper and lower | 420 | 100 (standard) /20 (parallel processing specification) | 200 | IP44 | 47 | 7068 | 1.5 | 750 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
|
|
DD400-250-LS (P5/P3) 2RPS specification |
Available upon quote | ± 50 (standard) /± 10 (at absolute position correction function option) | 55 | 85%RH or less, no condensation | 3000 | 6815744 | 0.191 | Absolute | Flangeless | DD40-472L01CNN (-p/P3) | 250 (249.8) | 30g (3 directions each twice) | AC1,500V, 1 minute | F's F | 1,700 | Rotating portion horizontal and upper and lower | 420 | 100 (standard) /20 (parallel processing specification) | 200 | IP44 | 33 | 4712 | 1 | 750 | ± 1 | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 40 (standard) /5 (high accuracy specification) /3 (high -precision specification) | 0 ~ 40 | 1G (3 direction 2H) | Natural cooling | 1,000m or less |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of CKD Nisshin Electrical Corporation Co., Ltd.
View more products of CKD Nisshin Electrical Corporation Co., Ltd.
About Company Handling This Product
CKD Nisshin Electrical Corporation Co., Ltd.
- Japan
- Since 1967
- 230 employees