Turbine -type pulse output flow meter VT TURBOTRON series
Krone Co., Ltd.
About This Product
■ Turbine type pulse output
・ The Turabotron Series is a highly reliable product that has been used as standard for the flow rate monitoring of tap water in Germany in Germany.
・ Lightweight, compact, high accuracy, low cost, wide measurement range, can be used for all applications.
■ structure
・ VTH & VTP
By the guide blade, the fluid rotates from the four directions to the rotor in the center, and counts it as a pulse when the rotor magnet passes through the hall sensor. 855 Pulses/Liter, NPN Open Collector Output is ± 1 % accuracy and repetition accuracy is ± 0.2 %.
・ VTI
If the magnetic body is mixed, you can use SUS as a substitute for magnets, and because it is embedded in each rotor, the parslett can be provided as optional as an option.
・ VTH: Economy print type
・ VTP: High pressure, high temperature specifications
・ VTI: High accuracy, SUS rotor
■ Applications
Tap water flow monitoring, etc.
* There are other model numbers.
-
Product
Turbine -type pulse output flow meter VT TURBOTRON series
-
Handling Company
Krone Co., Ltd.
10 Models of Turbine -type pulse output flow meter VT TURBOTRON series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Conjunction | Diameter | Electrical connection | Material Oling | Material pipe | Material rotor | Material rotor ASSY | Material sensor | Material shaft/bearing | Material unionut nuts | Maximum pressure | Maximum temperature | Measurement range | Particle size | Protection grade | Pulse | Reproducibility | Resolution | Sensor | Signal output | Supply power supply | accuracy | filter | signal | thermometer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VTH 15k5 |
Available upon quote | 3/4BSP male union nuts and seals | DN15 (inner diameter 15mm) | 1.5MPVC cable or 4-pin plug | NBR | plastic | PRI UL TEM (resin) | Hard ferrite magnet | plastic | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | PA GF 30 | 1MPa | 85 ° C | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 855 pulse/liter | ± 0.2% | 1.2ml/pulse | Hole sensor | Detection from 0.3 L/min | 4.5VDC-24VDC | ± 1% RD | Mesh 0.5mm (temperature 60 ° C) | Npn | PT100, PT1,000 3 lines, 1.5MPVC |
|
|
VTH 15ms |
Available upon quote | 3/4BSP male union nuts and seals | DN15 (inner diameter 15mm) | 1.5MPVC cable or 4-pin plug | NBR | Brass | PRI UL TEM (resin) | Hard ferrite magnet | plastic | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | PA GF 30 | 1MPa | 85 ° C | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 855 pulse/liter | ± 0.2% | 1.2ml/pulse | Hole sensor | Detection from 0.3 L/min | 4.5VDC-24VDC | ± 1% RD | Mesh 0.5mm (temperature 60 ° C) | Npn | PT100, PT1,000 3 lines, 1.5MPVC |
|
|
VTP 15ms |
Available upon quote | 3/4BSP male, female | DN15 (inner diameter 15mm) | 1.5m silicon cable | Viton | Brass | PRI UL TEM (resin) | Hard ferrite magnet | Brass | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | Brass | 30MPa | 150 ℃ | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 855 pulse/liter | ± 0.2% | 1.2ml/pulse | Hole sensor | Detection from 0.3 L/min | 4.5VDC-24VDC | ± 1% RD | - | Npn | - |
|
|
VTP 15va |
Available upon quote | 3/4BSP male, female | DN15 (inner diameter 15mm) | 1.5m silicon cable | Viton | SUS | PRI UL TEM (resin) | Hard ferrite magnet | SUS | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | - | 30MPa | 150 ℃ | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 855 pulse/liter | ± 0.2% | 1.2ml/pulse | Hole sensor | Detection from 0.3 L/min | 12VDC-24VDC | ± 1% RD | - | Npn | - |
|
|
VTI 15k5 |
Available upon quote | 3/4BSP male union nuts and seals | DN15 (inner diameter 15mm) | 2MPVC cable or 4-pin plug | NBR or VITON | plastic | PRI UL TEM (resin) | SUS pin | plastic | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | PA GF 30 | 1MPa | 85 ° C | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 1,795 pulse/liter | ± 0.1% | 0.6ml/pulse | Inductive proximity switch | Detection from 0.3 L/min | 12VDC-24VDC | ± 0.5% RD | Mesh 0.5mm (temperature 60 ° C) | PNP or NPN | PT100, PT1,000 3 lines, 2MPVC |
|
|
VTI 15ms |
Available upon quote | 3/4BSP male union nuts and seals | DN15 (inner diameter 15mm) | 2MPVC cable or 4-pin plug | NBR or VITON | Brass | PRI UL TEM (resin) | SUS pin | plastic | AR CAP Shaft AP1D (nickel, copper, etc.) and sapphire bearing | PA GF 30 | 1MPa | 85 ° C | 2-40 L/min, normal loading 20 L/MLN maximum | Up to 0.5mm | IP54 | 1,795 pulse/liter | ± 0.1% | 0.6ml/pulse | Inductive proximity switch | Detection from 0.3 L/min | 12VDC-24VDC | ± 0.5% RD | Mesh 0.5mm (temperature 60 ° C) | PNP or NPN | PT100, PT1,000 3 lines, 2MPVC |
|
|
VTH 25m S-180 |
Available upon quote | 1.1/4BSP male | DN25 (inner diameter 25mm) | 2MPVC cable | NBR | Brass | Pp | Hard ferrite magnet | plastic | SUS and sapphire bearing | - | 1MPa | 85 ° C | 4-160 L/Min, normal loading 80 L/MLN maximum | Up to 0.5mm | P54 | 67 pulse/liter | ± 0.5% | 15ml/pulse | Hole sensor | Detection from 1 L/min | 4.5VDC-24VDC | ± 3% RD | Mesh 0.6mm | Npn | - |
|
|
VTH 25k6-180 |
Available upon quote | 1.1/4BSP male | DN25 (inner diameter 25mm) | 2MPVC cable | NBR | plastic | Pp | Hard ferrite magnet | plastic | SUS and sapphire bearing | - | 1MPa |
80 ℃ 2Bar 60 ° C 5bar 30 ℃ 10Bar |
4-160 L/Min, normal loading 80 L/MLN maximum | Up to 0.5mm | P54 | 67 pulse/liter | ± 0.5% | 15ml/pulse | Hole sensor | Detection from 1 L/min | 4.5VDC-24VDC | ± 3% RD | Mesh 0.6mm | Npn | - |
|
|
VTM 25m S-180 |
Available upon quote | 1.1/4BSP male | DN25 (inner diameter 25mm) | 4 -pin plug connector | NBR | Brass | Pp | Hard ferrite magnet | Brass | SUS and sapphire bearing | - | 5MPA | 85 ° C | 4-160 L/Min, normal loading 80 L/MLN maximum | Up to 0.5mm | P54 | 67 pulse/liter | ± 0.5% | 15ml/pulse | Hole sensor | Detection from 1 L/min | 4.5VDC-24VDC | ± 3% RD | Mesh 0.6mm | Npn | - |
|
|
VTP 25VA-180 |
Available upon quote | 1.1/4BSP male | DN25 (inner diameter 25mm) | 4 -pin plug connector | NBR | plastic | Pp | Hard ferrite magnet | SUS | SUS and sapphire bearing | - | 5MPA | 85 ° C | 4-160 L/Min, normal loading 80 L/MLN maximum | Up to 0.5mm | P54 | 67 pulse/liter | ± 0.5% | 15ml/pulse | Hole sensor | Detection from 1 L/min | 4.5VDC-24VDC | ± 3% RD | Mesh 0.6mm | Npn | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Krone Co., Ltd.
View more products of Krone Co., Ltd.
About Company Handling This Product
- Japan
- Since 1980