Diaphram welding structure & WET/WET compatible independent pressure transducer DP10 series
Krone Co., Ltd.
About This Product
University research institution, aerospace industry, automobile industry, marine resource exploration, general industrial field, etc.
■ Characteristics
・ WET/WET differential pressure measurement
・ Diicophilam welding structure
・ Measurement of microscopic pressure at high line pressure
・ Excellent responsiveness
・ 550Pa ~ 22MPa corresponds to a wide range
·Corrosion resistance
■ Other features
・ Corrosive fluid can be measured directly into the pressure room
・ Highly spectacular frequency and excessive phenomena measurement can be performed
・ The volume and volume change of the pressure room are very small and do not affect the measurement system.
・ Small, lightweight, simple structure resistant to vibration and impact, excellent in temperature characteristics.
・ Do not affect accuracy even if the distance between the pressure sensor and the amplifier is 300m away
・ In addition to the standard stainless steel type, nickel plating / gold plating can be supported
・ Large permission is large and easy for anyone to use
-
Product
Diaphram welding structure & WET/WET compatible independent pressure transducer DP10 series
-
Handling Company
Krone Co., Ltd.
1 Models of Diaphram welding structure & WET/WET compatible independent pressure transducer DP10 series
| Product Image | Part Number | Price (excluding tax) | Change of volume of the pressure room | Compensation temperature range | Electrical connection | Exchange diaphragm | External dimensions | Line pressure | Measurement accuracy | Measuring category | Media | Operating temperature range | Over pressure | Pressure port | Pressure range | Pressure room volume | Temperature characteristics (SPAN) | Temperature characteristics (ZERO) | output | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DP10 |
Available upon quote | 0.005cc | -17 ℃ ~ 71 ℃ |
AMPHENOL: PTO2A-10-6P connector (standard) * Cannon: WK4-32S connector |
It cannot be replaced because it is a welding type | 38 x 38 x 51mm | Within 22MPa | ± 0.5%F.S (including linear, hysteresis, reproducibility) | Differential pressure | SUS410, BUNA-N, gas that conforms to the inconel | -53 ℃ ~ 121 ℃ | 200% F.S (up to 27.5MPa) | 5/16-24 UNF (female) | 0… ± 550pa ~ 0… 22MPa | 0.066cc | 0.072% Read/゚ C | 0.072% F.S/℃ (less than 14kpa)/0.036% F.S/℃ (14kpa or higher) |
Within 0 ± 10VDC in combination with an amplifier * Options: 4-20ma |
330 |
Customers who viewed this product also viewed
Other products of Krone Co., Ltd.
View more products of Krone Co., Ltd.
About Company Handling This Product
- Japan
- Since 1980