A-operate paint decompression valve flow control valve FCV-3 series-FCV-3

A-operate paint decompression valve flow control valve FCV-3 series-FCV-31

A-operate paint decompression valve flow control valve FCV-3 series-ANEST IWATA Corporation

A-operate paint decompression valve flow control valve FCV-3 series
ANEST IWATA Corporation

About This Product

■ For the aeroperary paint decompression valve, paint pressure can be adjusted by remote control
・ In the case of a painted environment with a robot or reciprocator, it is possible to eliminate fluctuations in the discharge due to the height difference by attaching it near the automatic gun.
・ FCV-31-R4/R8 has a difference in the air room of the diaphragm and the paint room, so it is ideal for adjusting a small discharge.

* The diameter of the diameter of the diaphragm is different from the ratio of air adjustment pressure and paint secondary pressure (after pressure adjustment). In addition, the greater the difference in the diameter of the diameter of the diaphragm, the more severe adjustment of the paint secondary pressure is possible, but please note that the maximum pressure will decrease.

Model
There are 8 models for this product.

Product
A-operate paint decompression valve flow control valve FCV-3 series

Handling Company
ANEST IWATA Corporation

*Please note that we may not be able to accommodate sample requests.

8 Models of A-operate paint decompression valve flow control valve FCV-3 series

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Product Image	Part Number	Price (excluding tax)	Air supply	Diafrum receiving pressure ratio	Guide	Material material material	Maximum air pressure	Maximum flow rate	Mounting dimension (back)	Mounting dimension (front)	Paint entrance	Paint exit	Paints maximum primary pressure	Total length x full width x full height	mass	type
	FCV-3	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 1	1,100ml/min or higher	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	2-M5 × 0.8, screw depth 13mm, interval 20mm	G3/8B	RC1/4x2	2.5MPA	84 x 84 x 106mm	570g/720g	General purpose
	FCV-3N	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 1	1,100ml/min or higher	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	2-M5 × 0.8, screw depth 13mm, interval 20mm	G3/8B	RC1/4x2	2.5MPA	84 x 84 x 106mm	570g/720g	General purpose
	FCV-31	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 1	1,100ml/min or higher	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function
	FCV-31N	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 1	1,100ml/min or higher	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function
	FCV-31-R4	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 4	35 ~ 100ml/min	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function, small amount/low pressure discharge
	FCV-31N-R4	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 4	35 ~ 100ml/min	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function, small amount/low pressure discharge
	FCV-31-R8	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 8	20 ~ 50ml/min	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function, small amount/low pressure discharge
	FCV-31N-R8	Available upon quote	RC1/8 φ6 Joint for tube joins	1: 8	20 ~ 50ml/min	Aluminum/stainless steel	0.6MPa	2.0L/min	2-M5 × 0.8, screw depth 8mm, interval 22mm	-	G3/8B	RC1/4x2	2.5MPA	84 x 112 x 112mm	750g/900g	With damp valve function, small amount/low pressure discharge

Click on the part number for more information about each product

Customers who viewed this product also viewed

Diaphram system paint decompression valve PR-5B series-ANEST IWATA Corporation

Diaphram system paint decompression valve PR-5B series

ANEST IWATA Corporation

Diaphragm Valve

5 models listed

Springless structure flow control valve FCV-5 series-ANEST IWATA Corporation

Springless structure flow control valve FCV-5 series

ANEST IWATA Corporation

Diaphragm Valve

3 models listed

Other products of ANEST IWATA Corporation

Handling is greatly improved and large -scale center cup screen Kiwami4 BA series-ANEST IWATA Corporation

Handling is greatly improved and large -scale center cup screen Kiwami4 BA series

ANEST IWATA Corporation

4 models listed

Design powdered electrostatic spray handgun EP-MG10 series that emphasizes coating efficiency-ANEST IWATA Corporation

Design powdered electrostatic spray handgun EP-MG10 series that emphasizes coating efficiency

ANEST IWATA Corporation

2 models listed

Hobby Airbrush Revolution Series pursuing ease of use and ease of purchase-ANEST IWATA Corporation

Hobby Airbrush Revolution Series pursuing ease of use and ease of purchase

ANEST IWATA Corporation

3 models listed

Glass and can be used for solvent -based paints-ANEST IWATA Corporation

Glass and can be used for solvent -based paints

ANEST IWATA Corporation

Use of high viscosity paint can be used-ANEST IWATA Corporation

Use of high viscosity paint can be used

ANEST IWATA Corporation

10 models listed

Air joint AJ series for air supply to various paint equipment-ANEST IWATA Corporation

Air joint AJ series for air supply to various paint equipment

ANEST IWATA Corporation

7 models listed

Paint hopper PH-20B series-ANEST IWATA Corporation

Paint hopper PH-20B series

ANEST IWATA Corporation

Stacker Gun MG-4C-ANEST IWATA Corporation

Stacker Gun MG-4C

ANEST IWATA Corporation

Stable application can be stable even with large -greetings small spray gun COG1 series-ANEST IWATA Corporation

Stable application can be stable even with large -greetings small spray gun COG1 series

ANEST IWATA Corporation

3 models listed

Use a carbide material for nozzle needle.-ANEST IWATA Corporation

Use a carbide material for nozzle needle.

ANEST IWATA Corporation

3 models listed

Fine and uniformly sprayed removal application unit VTS-5-ANEST IWATA Corporation

Fine and uniformly sprayed removal application unit VTS-5

ANEST IWATA Corporation

Coating Process Equipment

Adjustable amount of blowing amount Elevation spray gun FOG-50 series-ANEST IWATA Corporation

Adjustable amount of blowing amount Elevation spray gun FOG-50 series

ANEST IWATA Corporation

2 models listed

View more products of ANEST IWATA Corporation

About Company Handling This Product

ANEST IWATA Corporation

Japan
1,799 employees

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree