Hydraulic all-purpose test machine MRA-F2 series
Maekawa Test Machine Manufacturing
About This Product
The MRA-F2 series is a highly versatile computer measurement control system all-purpose test machine developed for the purpose of testing such as the tensile, compression, and bending of the products and products.
In particular, Maekawa's unique front open -open chuck mechanism is outstanding in improving chacking work, prevention of mistakes, and monitoring the grab until the end of the exam.
In addition, the F2 -type measurement control device incorporates a Japanese interactive LCD colorata -colored panel, and the test conditions can be tested with simple settings.
Completely open -open chuck
･ The frontal open -open chuck holder can make the test one touch one touch, so there is no mistake in the test one, so you can monitor the grabbing condition until the end of the exam.
Equipped with automatic hydraulic chacking devices
･ The adoption of the automatic hydraulic charcing device ensures that the test piece is chucking, and the detachment operation of the test piece is greatly reduced.
Type -faced claw nails
･ The original R -type structural chuck claws can be identified as a wide -range test piece without replacing the nails.
Analog drive of the test skills guidelines
･ Since it is an analog drive mechanism by the ODC motor, the true load is displayed smoothly.
Automatic test continuation function at the time of dose (patent application)
･ Automatic amount of automatic dosage in load control (metal automatic tensile control), which was not possible in the past, is possible. (option)
The test is possible by switching manually during the automatic load
･ During the automatic load test, you can continue the test in manual mode by switching one touch lever in the middle of the load to respond to changes in test controls that are unpredictable before the test.
Large and easy to see LCD color touch panel screen (Japanese dialogue type)
･ The touch panel displays only what you need, and the panel operation is simplified.
Tilt -type operation panel (design registration)
･ The operation panel is 30 degrees, so it has good visibility and operability.
Various test control mode
･ Based on test force control/stroke control, it is easy to set metal tensile test control/conquet compression test control/repetition control/step test control/quest test control, etc. (Including Ops Syon)
Automatic detection of surrender and dedicated digital display
･ In the metal tensile test mode, the surrender point is automatically detected during the test and digital is displayed on the upper right of the scale board.
Real -time display of load speed
･ During the test, the load speed meter can be displayed on the liquid crystal panel, so it is easy to verify that the actual speed matches the test standard speed.
Display value chicken function (new proposal)
･ You can stop and display any testing power with digital and analog guidelines during no load, making it convenient for photography and displaying.
Data processing by Persocon
-The measurement data is real-time output and data processing on a personal computer via the RS-232C interface.
Remote control by Persocon
･ External remote control (opsillon) allows you to test any remote test according to the test control command set on your computer.
-
Product
Hydraulic all-purpose test machine MRA-F2 series
-
Handling Company
Maekawa Test Machine Manufacturing
5 Models of Hydraulic all-purpose test machine MRA-F2 series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body dimension HXWXD MM | Calibration compression pressure plate 1 set of up and down | Compression interval (electric adjustment) mm | Effective column interval mm | Hydo amount (6 steps) | Lamb speed mm/min | Lower crosshead lifting speed mm/min | Maximum capacity kn | PN7271 | PN7292 | PN7293 | PN7294 | PN7296 | Power capacity 3 phase 200/20V KVA | Pulling interval (electric adjustment) mm | Rum Stroke MM | WXT MM for the tensile test for papers for the tensile test |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MRA-30-F2 |
Available upon quote | Approximately 2300 x 1050 x 450 | Φ70 | 0 to 530 | 470 | 0.6/1.5/3/6/6/15/30 × 10 | 0 to 100 | 350 | 300 |
Two switching output, one with IO-Link communication interface Show the acceptable range in red/green display The connection can be rotated at the optimal angle Excellent long -term stability with high overload protection A robust design that can be used in a harsh industrial environment Tightening torque [NM] After tightening by hand, turn 2-3 times to tighten, recommended tightening torque, packing lubricating oil, seal, tolerance pressure. |
- | - | - | - | Approximately 2.5 | 0 to 600 | About 200 | 65 x 0 to 35 |
|
|
MRA-50-F2 |
Available upon quote | Approximately 2500 x 1200 x 500 | Φ110 | 0 to 580 | 565 | 1/2.5/5/10/25/50 × 10 | 0 to 80 | 350 | 500 | - |
Two switching output, one with IO-Link communication interface Show the acceptable range in red/green display The connection can be rotated at the optimal angle Excellent long -term stability with high overload protection A robust design that can be used in a harsh industrial environment Tightening torque [NM] After tightening by hand, turn 2-3 times to tighten, recommended tightening torque, packing lubricating oil, seal, tolerance pressure. |
- | - | - | Approximately 3.0 | 0 to 650 | Approximately 250 | 100 x 0 to 40 |
|
|
MRA-100-F2 |
Available upon quote | Approximately 2830 x 1230 x 610 | Φ110 | 0 to 660 | 560 | 0.2/0.5/1/2/5/10 × 100 | 0 to 80 | 300 | 1000 | - | - |
Two switching output, one with IO-Link communication interface Show the acceptable range in red/green display The connection can be rotated at the optimal angle Excellent long -term stability with high overload protection A robust design that can be used in a harsh industrial environment Tightening torque [NM] After tightening by hand, turn 2-3 times to tighten, recommended tightening torque, packing lubricating oil, seal, tolerance pressure. |
- | - | Approximately 5.0 | 0 to 750 | Approximately 250 | 115 x 0 to 40 |
|
|
MRA-100B-F2 (wide type) |
Available upon quote | Approximately 2850 x 1140 x 770 | Φ110 | 0 to 900 | 760 | 0.2/0.5/1/2/5/10 × 100 | 0 to 80 | 300 | 1000 | - | - | - |
Two switching output, one with IO-Link communication interface Show the acceptable range in red/green display The connection can be rotated at the optimal angle Excellent long -term stability with high overload protection A robust design that can be used in a harsh industrial environment Tightening torque [NM] After tightening by hand, turn 2-3 times to tighten, recommended tightening torque, packing lubricating oil, seal, tolerance pressure. |
- | Approximately 5.0 | 0-1000 | Approximately 250 | 115 x 0 to 40 |
|
|
MRA-200B-F2 |
Available upon quote | Approximately 3830 x 1200 x 900 | Φ110 | 0-1000 | 740 | 0.5/1/2/5/10/10/20 × 100 | 0 to 80 | 300 | 2000 | - | - | - | - |
Two switching output, one with IO-Link communication interface Show the acceptable range in red/green display The connection can be rotated at the optimal angle Excellent long -term stability with high overload protection A robust design that can be used in a harsh industrial environment Tightening torque [NM] After tightening by hand, turn 2-3 times to tighten, recommended tightening torque, packing lubricating oil, seal, tolerance pressure. |
Approximately 10.0 | 0-1150 | About 300 | 150 x 0 to 50 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Maekawa Test Machine Manufacturing
View more products of Maekawa Test Machine Manufacturing
