Product
Achieving high -efficiency power supply wide range programable switching DC power supply SPS5051XHandling Company
Wave CrestItems marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Current Programming Resolution | Current Readback Accuracy (MA) | Current Readback Resolution | Current Setting Accuracy (Ma) | Fall Time | LINE Regulation (MA) | LINE Regulation (MV) | LPP | Load Regulation (MA) | Load Regulation (MV) | Low AC Input Protection | NO LOAD | OCP Setting Accuracy | OCP Setting Range (A) | OTP | OVP Setting Accuracy | OVP Setting Range (V) | Output Channel (CH) | Power Ratio | R.M.S (MA) | RISING/FALLING VOLTAGE SLEW Rate (V/S) | RMS Ripple (MV) | Ratered Load | Ratered Output Current (a) | Ratered output voltage (v) | Remote Compensation Voltage | Ripple (PK to PK) (MV) | Ripple and Noise | Rise Time | Rising/Falling Current Slew Rate (A/S) | TOTAL RATED OUTPUT POWER (W) | Temperature Coofficient | Transment Response Time (MS) | VOLTAGE READBACK ACCURACY | Voltage Programming Accuracy | Voltage Programming Resolution | Voltage Readback Resolution |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPS5051X |
Available upon quote | 1MA | 0.1%± 20 | 1MA | 0.1%± 10 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 8 | 3 | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | Ten | Ten | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 1 to 11 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 5 ~ 55 | 1 | 2.77 | Ten | 0.1 ~ 100 | Four | 50ms | Ten | 50 | 0.6V | 45 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 20.00 | 180 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV | |
SPS5081X |
Available upon quote | 1MA | 0.1%± 20 | 1MA | 0.1%± 10 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 18 | 40 (from 90 ~ 132vac or 170 ~ 265vac, Consant Load) | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | 18 | 40 (from Noload to Full Load, Contant Input Voltage) | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 1.5 ~ 16.5 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 8 ~ 88 | 1 | 3.33 | 27 | 0.1 ~ 160 | 7 | 50ms | 15 | 80 | 0.6V | 60 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 30.00 | 360 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV | |
SPS5082X |
Available upon quote | 1MA | 0.1%± 40 | 1MA | 0.1%± 30 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 32 | 40 (from 90 ~ 132vac or 170 ~ 265vac, Consant Load) | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | 32 | 40 (from Noload to Full Load, Contant Input Voltage) | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 1.5 ~ 16.5 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 8 ~ 88 | 1 | 3.33 | 54 | 0.1 ~ 160 | 11 | 50ms | 30 | 80 | 0.6V | 80 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 60.00 | 720 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV | |
SPS5083X |
Available upon quote | 1MA | 0.1%± 50 | 1MA | 0.1%± 40 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 45 | 40 (from 90 ~ 132vac or 170 ~ 265vac, Consant Load) | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | 45 | 40 (from Noload to Full Load, Contant Input Voltage) | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 3-33 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 8 ~ 88 | 1 | 3.33 | 81 | 0.1 ~ 160 | 14 | 50ms | 45 | 80 | 0.6V | 100 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 90.00 | 1,080 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV | |
SPS5084X |
Available upon quote | 1MA | 0.1%± 20 | 1MA | 0.1%± 10 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 18 | 40 (from 90 ~ 132vac or 170 ~ 265vac, Consant Load) | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | 18 | 40 (from Noload to Full Load, Contant Input Voltage) | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 4.5 ~ 49.5 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 8 ~ 88 | 2 | 3.33 | 27 | 0.1 ~ 160 | 7 | 50ms | 15 | 80 | 0.6V | 60 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 30.00 | 720 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV | |
SPS5085X |
Available upon quote | 1MA | 0.1%± 20 | 1MA | 0.1%± 10 | 90% ~ 10% of Ratered Output Voltage, Ratered Resistance Load | 18 | 40 (from 90 ~ 132vac or 170 ~ 265vac, Consant Load) | THE OVER POWER LIMIT IS APPROXIMATELY 105% of The Ratered Output Power. | 18 | 40 (from Noload to Full Load, Contant Input Voltage) | Shut Off Output. | 50ms | ± (2% of Ratered Output Current) | 1.5 ~ 16.5 | Over Temperature Alarm and Shut Off Output. | ± (2% of Ratered Output Voltage) | 8 ~ 88 | 3 | 3.33 | 27 | 0.1 ~ 160 | 7 | 50ms | 15 | 80 | 0.6V | 60 | (NOISE BANDWIDTH 20MHz; Ripple Bandwidth 1MHz) | 10% ~ 90% of Ratered Output Voltage, Ratered Resistance Load | 0.01 ~ 30.00 | 1,080 | 100ppm/° C from Ratered Output Voltage Following 30-Minute Warm-UP. | 1 (Time for Recovery to within 0.1%+10mv of ITS RATED OUTPUT AGAINST CURRENT OF 50%~ 100%.) | 0.1%± 20 (MV) | 0.1%± 10 (MV) | 1MV | 1MV |
Click on the part number for more information about each product