EE300EX-M1
TEKHNE

Temperature and humidity dew transmitter feature ･ Gas explosion -proof / dust explosion proof certification ･ Installation of Zone 0 Div.1 (due to certification) ･ Converted to relevant physical quantities ･ Stainless steel housing and stainless steel probe ･ Maintain accuracy up to a high temperature of up to 180 ° C ･ Maximum pressure 30MPa Main use ･ Temperature and humidity control in the electrostatic paint booth ･ Temperature and humidity control in the explosion -proof area ･ Control of chemical processes ･ Pharmaceuticals ･ Explosive/dangerous storage room ･ Flour manufacture ･ Dew point measurement of natural gas ･ Measurement of water water water ･ Russia measurement with natural gas hub Japan and overseas explosion -proof products EE300EX temperature dew point transmitter was developed for measurement applications in explosive risk areas. In addition to Japan TIIS, we have obtained explosion -proof certification for Europe (ATEX), international (IECEX) and North America (FM). It is possible to measure high accuracy up to high temperatures at 0 to 100 % RH and -40 to 180 ° C and measure at 1 kpa to 30 MPa. Reliable measurement in dangerous areas EE300EX can be used for combustible gas and dust. The entire transmitter can be installed in an explosion dangerous area. By selecting a remote probe, you can support temperature classification up to T6. EE300EX, which uses stainless steel housing and stainless steel detection probe, is the best transmitter for harsh industrial purposes. A proven track record guarantees reliable measurement performance and long -term stability. User -friendly flexibility The two -wire technology is powered through the essential safety power supply and Zenabaria. The measured value is output in analog 4-20mA. In addition to humidity measurement and temperature measurement, you can output the calculation value of exposure points, frost points, absolute temperature, mixing ratio, and other water -related physical quantities. You can change the settings on your PC It is also possible to customize the set value using configuration software outside the explosion area. This includes analog output settings, temperature and humidity calibration, etc. display You can select two types of measurements or computing physical quantities with the push button on the display (optional) at the top of the housing. (However, in the case of use in the environment where gas is present in combustible dust, fiber, flying objects, and EPL GA IIC (Group A & B), the displayed option cannot be used.) 2 parts of parts EE300EX, which uses stainless steel housing and stainless steel detection probe, is the best transmitter for harsh industrial purposes. Because of the two parts composition, it is easy to install without complicated wiring, and the measurement unit can be replaced quickly. Example of installation in explosion danger areas EE300EX can be used for combustible gas and dust. The entire transmitter can be installed in an explosion dangerous area.