Press brake safety device DSP-J
Komori Safety Device Lab Co.,Ltd
About This Product
Test number No. TA501
■ Characteristics
･ 2 modes can be used properly according to the work
Front / central zone all usage mode (mode1)
Front zone cancellation mode (Mode2) (used when bending boxes and small items)
･ Mold replacement is also easy
■ Overview
･ Laser light and four light receiving points create a protective zone (area) to protect the worker's hands and fingers.
The laser light irradiated from the floodlight reaches the laser receiving point of the light receiver, creating a protective area for the front detection zone and the central detection zone. These two detected areas protect the worker's finger. By selecting two driving mode 1 and 2 on the operation box, you can smoothly perform the processing work. The press brake stops suddenly when the central detection zone is shielded during high -speed closed operation.
･ Disable during closed operation
In the high -speed closing operation, each zone operates effectively, and the press stops suddenly by blocking the detection zone (light receiving point). Set the lighting point of the detection zone directly below the upper type by closing the operation so that the speed of the press is switched to a low -closing speed (10mm/s or less) before detecting the material. When the speed is switched to a low -closing speed, all the light receiving points are invalidated. All light receiving points in the closing process must be low closed speed (10 mm/s or less).
-
Product
Press brake safety device DSP-J
-
Handling Company
Komori Safety Device Lab Co.,Ltd
-
Categories
1 Models of Press brake safety device DSP-J
| Product Image | Part Number | Price (excluding tax) | Housing | Laser class | Laser effective distance | Laser light source | Laser response time | Material | Operating temperature | Output comprehensive delay time | Relay A contact output | frequency | power supply | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DSP-J |
Available upon quote |
Semitrine TX RX: IP65 |
1m | 15m | 650nm | 5ms | Aluminum polycarbonate, fiberglass | 0 to 50 ℃ | 15ms or less | 2ch | 50/60Hz | AC100 or 200V |
Ryotomer TX: 194 x 85 x 128mm Introduced RX: 194 × 82 × 128mm Control unit AL2: 87 × 90 × 58mm |
Remine TX: 1,300g Introduced light device RX: 1,340g Control unit AL2: 490G |
Customers who viewed this product also viewed
Other products of Komori Safety Device Lab Co.,Ltd
View more products of Komori Safety Device Lab Co.,Ltd
