About This Product
As a construction accident, mortar and tiles may peel off from the concrete surface and fall off. As a repair method, there is a method of using a pinning together and injecting epoxy resin etc. into the peeled portion. At this time, if the concrete or mortar is highly hydrated, sufficient adhesive strength is not obtained.
If you can measure the internal moisture, you can know the timing of the injection material and the timing of construction, so we recommend using the concrete mortar water meter Hi-800. Two holes are drilled to the position you want to measure, and the moisture can be measured simply by inserting the sensor into it. Opened holes can be used as an injection hole for repair materials, so you can save useless time.
This instrument is a water meter developed based on the former Ministry of Construction Research Institute, "Public -Democratic Folk Co -research, Repair of Exterior Materials, and Development of Reform Technology". With a small and lightweight handy device, you can see that the moisture inside the mortar can be picked up.
■ Measurement of water at the desired depth
Up to a depth of 50mm, you can see the water at any position. You can measure up to 150mm by using the deep sensor of the option.
■ Small and lightweight handy type
The body is 75mm wide, 140mm long, 31mm thick, about 500g of mass, size in pocket.
■ Up and lower limit alarm setting function
When the maximum moisture is set and the lower limit, the buzzer will be notified when the water outside the setting range is measured.
■ Auto power -off function
If you do not measure or operate the key for 15 minutes, the power will be automatically turned off to prevent the battery from wasting.
■ Temperature measurement is possible
Temperature measurement from 0 ° C to 50 ° C can be measured.
-
-
Product
Electric resistance type concrete mortar water meter Hi-800