Load measurement/control graphic display/touch panel type digital indicator F372A
Unipulus
About This Product
■ The F372A is a digital indigeta that combines it with a streagage sensor and can display the physical volume such as pressure, load, and torque.
You can visually capture changes in physical quantities that are difficult to catch with numbers alone by waveform display. By high -speed processing of up to 2000 times/second, it can also respond to small -speed changes, and is equipped with a variety of hold functions and judgment functions, including the upper and lower limit comparison functions, and is ideal for selection and test machines that perform good or correct judgments for assembly work and automatic processing results.
-
Product
Load measurement/control graphic display/touch panel type digital indicator F372A
-
Handling Company
Unipulus
-
Categories
1 Models of Load measurement/control graphic display/touch panel type digital indicator F372A
| Product Image | Part Number | Price (excluding tax) | Analog club accuracy | Analog club analog filter | Analog club analog monitor output | Analog portion applied voltage | Analog section A / D converter | Analog section signal input range | CE Marking Compatible General Performance | Comparative value selection | Comparison function | Display area display area | Display display | Display portion dot configuration | Displayed portion display value | External signal external input signal | External signal external output signal | General performance external dimensions | General performance power consumption | General performance power supply voltage | General performance rush current (TYP) | General performance usage conditions | General performance weight | Hold function function list | Interface 232 | Interface BCO | Interface BSC | Interface CCL | Interface DAI | Interface DAV | Interface ODN | Interface SIF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
F372A |
Available upon quote | Non -linear: 0.02% FS ± 1 DIGIT or less (at 3.0 MV / V) Zero drift: 0.5 μV / ℃ RTI gel lift: 0.01% / ℃ | Select from LPF (low -pass filter) (-6 DB / Oct.) 30, 100, 300, 1k Hz | Output level: 1 MV / V per 2 V load resistance: 2 kΩ or more | DC 10 V, 2.5 V ± 5% (switching by setting) Output current: 120 mA or less | Speed: 2,000 times / second resolution ability: 24 Bit (binary) 3.0 MV / V approx. 1 / 30,000 | -3.0 ~ +3.0 MV / V | EMC Directive EN61326-1 | Four types of comparative values can be memorized and switched | Up to 4 points can be set up to 4 points in total | 71 (W) mm x 53 (H) mm | 3.5 inch TFT color LCD | 320 x 240 dot | 5 digits: -99,999- +99,999 Codes: Negative display in the top digit | Work selection input / hold control input / digital zero input (DZ) / graph drawing control input / comparative value selection input IC = 10 ma or less | Up and lower limit comparative output (HH, HI, OK, LO, LL) / RUN output / hold completion output / graph drawing end output VCEO = 30 V (max), IC = 30 ma | 96 (W) x 96 (H) x 138 (D) mm (not included) | 5 W type. | DC 24 V (± 15 %) | 55 A, 1 MSEC (at room temperature, cold start) | Temperature: Used temperature -10 ° C to + 40 ° C storage temperature -20 ° C to + 60 ° C humidity: 85 % RH or less (condensation not possible) | Approximately 1.0 kg | 1) Samples 2) Botom 3) Bottom 3) Bottom 4) Botom 4) P-5) Average value 6) Maximum value 8) Maximum value 9) Maximum value 9) Sample & Bottom 12) Sample & P-P-P 13) Sample & P-P-P 13) Sample & Average value 14) Sample & transformation point 15) Sample & maximum value 16) Sample & minimal value 17) Sample & polar value difference 18) Peak & bottom 19) Peak & P-P-P21) Botom & P-P21) Average value & bottom 23) Average value & bottom 23) Maximum value & p-P24 | RS-232C communication interface | BCD parallel data output interface (source type) (optional) | BCD parallel data output interface (source type) (optional) | CC-Link interface (optional) | D / A converter current output (optional) | D / A converter voltage output (option) | DeviceNet interface (optional) | Si / F 2 -wire serial interface |
Customers who viewed this product also viewed
Other products of Unipulus
![[For load measurement] High -precision tensile / compressed load cell USB58-Unipulus](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30004442023062168.png)
View more products of Unipulus
About Company Handling This Product
- Japan