Kawatatek Co., Ltd.

■ Characteristics ・ Lightweight, speedy ・ Inexpensive ・ Easy operation ・ Reduced processing time-15mm to 300mm center drill...

2 models listed

• Machining / Machine Tools

• Carbide Drills

■ Characteristics ・ Long stroke type ・ Completed with cutting powder measures suitable for use on a standing lathe ・ Tsumees...

5 models listed

• Fixtures

• Hydraulic Vises

■ Stable work maintenance The part of the work is stored in the main axis and the vicinity of the processing unit is strong. ■...

5 models listed

• Fixtures

• Hydraulic Vises

It is thin, has a low center of gravity and has a large load. Because it is small and light, it does not burden Positioners and...

3 models listed

• Clamps & Fasteners

• Chucks

■ Carbal claws The new carbail nail has been adopted to reduce the height of the grid to 3.5mm. It has the effect of pushing th...

2 models listed

• Machining / Machine Tools

• Machine Vises

■ Characteristics ・ Chuck size (φ600 -φ1,500) ・ When the pinion is turned, the three nails move (scroll chuck) ・ Three claws...

3 models listed

• Clamps & Fasteners

• Chucks

By changing the claws into this platform (option), you can use the noodles. 44/46 Series Chuck.

6 models listed

3 Self -centering chucks for claws raw claw -type rings ■ Characteristics ・ It does not require a ring, core money, etc., whi...

5 models listed

■ Characteristics ・ Ideal for processing valves, joints, etc. ・ Chuck size 6 ”, 10”, 12 ” ・ Manual grasp, manual discount

3 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Built -in air cylinder inside the chuck ・ Ideal for flange processing with a standing machine ring center...

3 models listed

• Clamps & Fasteners

• Air Chucks

■ Characteristics ・ Chuck size 15 "to 28" ・ Hydraulic mismanagement, manual discount ・ The tightening of the processing mate...

5 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Additional ballet for NC lathes ・ 1 push 45 ° rotation ・ 16mm square bytes 8 pieces can be installed

• Machining / Machine Tools

• Lathe Turrets

■ Characteristics ・ The tightening claw thrust can be changed by the pressure used ・ The claw movement speed can be changed d...

4 models listed

• Tools

• Hydraulic Torque Wrenches

It can be attached to the short taper (type A) main axis, and the claw stroke is large so that it is suitable for large process...

2 models listed

• Fixtures

• Hydraulic Vises

This type is limited to one -way output, while keeping the advanced FDR type high functionality as it is. ■ High -speed cuttin...

7 models listed

Standard handle for independent/scroll chuck.

7 models listed

■ Characteristics ・ Chuck size φ270, φ320 ・ Hydraulic mismanagement, manual discount

2 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Three -sided processing can be made at one time with one installation, and it is economical. ・ Due to the...

4 models listed

• Clamps & Fasteners

• Sign Vises

■ Characteristics ・ Additional ballet for NC lathes ・ 2 push 90 ° rotation ・ 4 16mm square bytes can be installed

• Machining / Machine Tools

• Lathe Turrets

The table slope and table rotation can be automatically performed on the push bar of the touch decide. The ground area is very ...

4 models listed

Standard equipment with rotating function ■ High -speed cutting compatible with high rigidity / cut -resistant power high scho...

2 models listed

Chuck designed for the purpose of operating with a power wrench. ■ Automation and labor saving ・ This is a system that automa...

• Clamps & Fasteners

• Chucks

It is a screw stick for NOBEL independent chuck. * There are other model numbers.

10 models listed

■ Characteristics ・ Claw opening and closing, claw rotation operation can be easily operated with the press button switch of h...

2 models listed

■ High -speed cutting compatible with high rigidity / cut -resistant power high school crawn power -Introduces a fixed method w...

Chuck replacement according to the processing content and application on the standing lathe is possible in a short time. It can...

■ High -speed cutting compatible with high rigidity / cut -resistant power high school crawn power -Introduces a fixed method w...