Standard equipment with rotating function maximum touch dex FDK-450
Kawatatek Co., Ltd.
About This Product
Standard equipment with rotating function
■ High -speed cutting compatible with high rigidity / cut -resistant power high school crawn power
-Introduces a fixed method with a lock pin, and the clamp power is about 2 to 4 times that of the same size general percentage.
・ It supports all of the milling, end -milled, drill processing, and tapping processing.
・ High -speed cutting of the carbide drill is possible even in a position farther away from the rotation center.
■ Easy mounting
・ Because there is no power control cable, it is easy to install to a machine.
・ It can be mounted on all types of pallet changer.
・ If you attach it to a horizontal machine ring center, you can process 5 sides only with the function of the machining center.
・ Attach another touch decide to the touch dex table and enable 5 -sided processing.
■ Space saving
・ Because there is no power control cable, it can be installed in a minimum space.
-The installation area is about 1/2 of the general output stand.
・ You can process a large number of works with two to multi -platforms on the table.
■ High accuracy / high durability
The unique clamp method will maintain high accuracy of the locking pin wear. The backlash zero has been realized semi -permanently.
■ Easy index
・ The pushbar can be pressed with the tools in use if it is a rigid tool that can withstand the suppression heavy (a guide as a guide as a guide).
・ Even if you use a thin tool, you do not need to replace the tool for the index if you press it with a collet holder or main axis cover.
-
Product
Standard equipment with rotating function maximum touch dex FDK-450
-
Handling Company
Kawatatek Co., Ltd.
2 Models of Standard equipment with rotating function maximum touch dex FDK-450
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Available load (N / M (kgf / m)) | Centahaite side push horizontally (mm) | Center hole diameter (mm) | Center hole diameter penetration (mm) | Centerhaite vertically push vertical (mm) | Discernable accuracy (cumulative) (second) | Global groove for guide blocks (mm) | Minimum permeated angle (degree) | Product mass (kg) | Push bar full stroke amount (mm) | Push bar load (N (kgf)) | Pushver full stroke table -out angle (degree) | Repeat accuracy (seconds) | Table diameter (mm) | Unbalanced load (kg) | Valley width for guide block vertical (mm) | When the load loaded load is used vertically (kg) | When using the loading load horizontally (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FDMH-150 |
Available upon quote | 588 (60) | 110 | 40 | 37 | 120 | 30 | 16 | Five | 33 | About 38 | Approximately 295 (about 30) | 45 | ± 3 | 170 | Four | 16 | 200 | 300 |
|
|
FDK-450 |
Available upon quote | 4560 (465) | - | 140H7 | 120 | 250 | 30 | - | Five | 214 | Approximately 93 | Approximately 1,960 (about 200) | 45 | ± 3 | 450 | 40 | 18 | 450 | - |
Click on the part number for more information about each product
Other products of Kawatatek Co., Ltd.
View more products of Kawatatek Co., Ltd.
About Company Handling This Product
- Japan
- Since 1933
- 48 employees