Product
Steel / crane sensor HMPDHandling Company
Hokuyo ElectricItems marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Analog output | Approximately USED HUMIDITY | Approximately used humidity | Available bent radius | Connection camera side | Connection controller side | Cooling Water Temperature | Cooling Water USED WATER PRESSURE | Cooling water temperature | Cooling water used water pressure | Detected Object | Detected object | Equipment abnormal output (run) | Heat material output (DETECTION) | Light Receiving Element | Light receiving element | Minimum Detection | Minimum detection | Power-Supply Voltage | Power-supply voltage | Reduced output (LOW) | Scanning Cycle | Scanning cycle | Signal output (Signal) | USED Peripheral Temperature | Used peripheral temperature | input | length | mass | power consumption | resolution |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
VMH-200 |
Available upon quote | - | 45-85 % RH (But No Freezing) | 45-85 % RH (but no freezing) | - | - | - | 35 ° C or Less, Water Quality: Shimizu for General Industrial | 100-200 KPA, Water Resistance: 500 KPA, Water USED: 4 to 6 LITERS/Min | 35 ° C or less, water quality: Shimizu for general industrial | 100-200 kpa, water resistance: 500 kpa, water used: 4 to 6 liters/min | Heat Material 750 ° C or Higher | Heat material 750 ° C or higher | - | - | 2,048BitCmos Image Sensor | 2,048bitCmos image sensor | Detection View X 4/2,048 | Detection view x 4/2,048 | Supply from Controller | Supply from controller | - | 3ms/6ms (Selected by Switching) | 3ms/6ms (selected by switching) | - | -5 ~ + 55 ° C, Water -Cooled -5 to + 80 ° C | -5 ~ + 55 ° C, water -cooled -5 to + 80 ° C | - | - | APPROXIMATELY 3.5kg | - | Detection View X 1/2,048 | |
VMH-A200 |
Available upon quote | Maximum -10 ~+10V ± 0.1% 10 ma (output impedance 100Ω) 2 points (each sensor head) | - | 45 ~ 85%RH (but not freezing or condensation) | - | - | - | - | - | - | - | - | - | 1A Photo Moslay Relay Output VOFF ≦ AC/DC 250V, LO ≦ AC/DC 100ma 1 point (OR of each camera) | 1C Photo Moslay Relay Output Voff ≦ AC/DC250V, LO ≦ AC/DC100MA 2 points (each camera) | - | - | - | - | - | AC100 ~ 240V (50/60Hz) (voltage fluctuation tolerance AC85-264V) | Photoba plastic output VCE ≦ DC80V, LC ≦ DC50MA 1 point (or or OR of each camera) | - | - | 1A Photo Moslay Relay Output VOFF ≦ AC/DC 250V, LO ≦ AC/DC 100ma 1 point (OR of each camera) | - | 0 ~+50 ° C (but not freezing or condensation) | Camera sensitivity switching input, photocoupla input 1 point (camera 1, 2 common), DC24V 50mA or less | - | Approximately 2kg | 40VA or less | - | |
cable |
Available upon quote | - | - | - | R40mm or higher | 14P MS connector | 15P D-Sub connector | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -15 ~+75 ° C (but not freezing or condensation) | - | Up to 100m | Approximately 11kg (for 100m) | - | - |
Click on the part number for more information about each product