Single use biororia staff with weight management for production for commercial commercial production Purfusion system VMF-WSUB REACTOR
Satake Martimics Co., Ltd.
About This Product
■ Dedicated aircraft development / customization compatible ・ Single use exclusively according to the required specifications
When using iPS cells etc. in regenerative medicine in 3D floating unbarbonized culture, it is important how efficiently the medium is replaced. By stopping the culture device to replace the medium, the cells settle to the bottom of the culture tank and have the property of sticking arbitrarily on the spot. This may vary in the cells in the cell lumps and have a negative effect on differentiation induction efficiency.
In addition, when aiming for differentiation induction, it is necessary to discharge single cells together with the medium and devise them so that they do not fasten them in the culture tank. The medium emission must be achieved stably. In addition, a control system for continuously performing this medium exchange is important.
The VMF-WSUB/TCS system has realized this. Finished with specifications that can be used for actual production.
-
Product
Single use biororia staff with weight management for production for commercial commercial production Purfusion system VMF-WSUB REACTOR
-
Handling Company
Satake Martimics Co., Ltd.
2 Models of Single use biororia staff with weight management for production for commercial commercial production Purfusion system VMF-WSUB REACTOR
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Band heater | Culture tank dimensions | External dimensions | How to transmit | Maximum up and down amplitude | Maximum wing speed | Rated power supply | Stirring motor | Stirring wing | Temperature adjustment range | Temperature control accuracy | Temperature control method | Temperature setting | Total capacity of the culture tank | Used peripheral temperature range | Ventilation method | Vertical movement settings | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VMF-500W |
Available upon quote | 40W (prevention of excessive temperature 60 ° C) | Inner diameter 94/87 x depth 110mm | W360 x H905 x D485mm | Linear shaft drive non -seal type | 40mm | 300mm/s | AC100V, 50/60Hz | Maximum output 800W | Standard: VM200 | Room temperature + 5 ~ 20 ° C (usually 37 ℃ setting) | ± 0.3 ℃ (37 ° C) | Band heater method (PID control) With over -temperature prevention function (MAX60/80 ° C) | Digital setting, record output 1 ~ 5V | 0.5L | 10 ~ 35 ° C | Sintering metal method * Options | Touch panel input, record output 1 ~ 10V | Approximately 28kg |
|
|
VMF-3000W |
Available upon quote | 160W (prevention of excessive temperature 80 ° C) | Inner diameter 159/138 x depth 202mm | W360 x H905 x D485mm | Linear shaft drive non -seal type | 40mm | 300mm/s | AC100V, 50/60Hz | Maximum output 800W | Standard: VM100 + VM200 | Room temperature + 5 ~ 20 ° C (usually 37 ℃ setting) | ± 0.3 ℃ (37 ° C) | Band heater method (PID control) With over -temperature prevention function (MAX60/80 ° C) | Digital setting, record output 1 ~ 5V | 3L | 10 ~ 35 ° C | Sintering metal method * Options | Touch panel input, record output 1 ~ 10V | Approximately 30kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Satake Martimics Co., Ltd.
View more products of Satake Martimics Co., Ltd.
About Company Handling This Product
- Japan
- Since 1920
- 200 employees