Automatic chlorine management device with sensor cleaning mechanism Aqua Sleinzerispa RIC-SB
Aquas Co., Ltd.
About This Product
■ Automatic chlorine management device
Always monitor the residual chlorine concentration, control the injection pump, and maintain the appropriate residual chlorine concentration. It is possible to minimize the concentration and defect to the minimum.
■ Always monitor the residual chlorine concentration.
In the measurement method, a 3 -electrode Polarograph method, which is less likely to be affected by the external environment, was adopted. Measure the residual chlorine concentration accurately.
■ You can use your injecting pump.
The concentration transmission output (DC4 ~ 20mA), control contact output, and upper and lower limit warning point outputs are standard equipment. You can automatically control and remote monitoring of your chlorine injection pump.
■ With sensor washing mechanism
・ Beads filled at the tip of the sensor rotate to prevent dirt adhesion. By performing electrolytic cleaning on a regular basis, you can drive without reducing the performance of the sensor.
・ Electrolysis is automatically started by pressing the button.
■ Notes on specifications
* 1 Depending on the quality of the spring and the usage conditions, the life of the electrode may be shortened. Please contact us about the water quality in advance.
* If you use it in 0.00 to 10.00 mg/L, follow the instruction manual and change the settings.
-
Product
Automatic chlorine management device with sensor cleaning mechanism Aqua Sleinzerispa RIC-SB
-
Handling Company
Aquas Co., Ltd.
1 Models of Automatic chlorine management device with sensor cleaning mechanism Aqua Sleinzerispa RIC-SB
| Product Image | Part Number | Price (excluding tax) | Contact capacity | Measurement concentration range | Measurement ingredient | Measurement method | Measurement principle | Peripheral temperature range | Radius | Target water * 1 | Temperature compensation | Transmission output | Water inspection PH range | Water inspection temperature range | power consumption | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
RIC-SB |
Available upon quote | AC 250V 1a Max. | 0.00 ~ 2.00 mg/L, 0.00 ~ 10.00 mg/L * 2 | A Mode: Play Remaining Chlorine B Mode: All Remaining Chlorine Capacity | Bead cleaning type microscopic metal 3 electrode type | Polaralograph method | -10 ~ 45 ℃ | 5ms/m or higher (but chloride ion concentration 1000mg/l less than) | Hot spring water, warm bath, tap water, well water | Automatic temperature compensation by thermistor | DC 4 ~ 20ma Insulated maximum load resistance: 500Ω | pH5.8 ~ 8.0 * 1 | 0 ~ 45 ° C (without freezing) | Approximately 5VA | AC 100 ~ 240V single phase ± 10% 50Hz/60Hz |
Other products of Aquas Co., Ltd.
View more products of Aquas Co., Ltd.
About Company Handling This Product
- Japan
- Since 1958
- 474 employees