Multipurpose Etherncat (R) Slave Module Adins1576
Advanet
About This Product
■ Overview
・ ADINS1576 is an EtherCat® slave board with an Etherncat® slave stack in the SITARAAM3357 processor equipped with ARM® Cortex®-A8 ARM® Cortex®-A8.
・ Equipped with multiple versatile expansion ports and can be connected to IO boards and various sensors. For this reason, you can build devices optimized for complex needs in a short period of time.
・ By introducing ADINS1576 into existing equipment and equipment, it is possible to support EthernCat® communication.
・ Professional services are provided as a professional service for customization of firmware, development of sensor base plates, housing and other substrates, and can be used to reduce customer development periods.
■ Characteristics
・ Equipped with SITARA AM3357 processor (ARM® Cortex®-A8 Single Core)
・ EtherCat® slave
・ Equipped with SPI, I2C, UART, GPIO, etc. as an extension port
・ High connection 2.54mm pitch connector and HIROSE FX20 connector (optional)
・ Compatible with wide input power supply DC5V ± 5%or DC15 to 40V (optional)
・ Small 70mm x 75mm
-
Product
Multipurpose Etherncat (R) Slave Module Adins1576
-
Handling Company
Advanet
-
Categories
1 Models of Multipurpose Etherncat (R) Slave Module Adins1576
| Product Image | Part Number | Price (excluding tax) | CPU operation frequency | CPU processor | Current current consumption (maximum design) | EtherCat® LED | EtherCat® PHY | EtherCat® connector | EtherCat® port | EthernCat® operation mode | EthernCat® transmission standard | EthernCat® type | External I/F extension port 1 | External I/F extension port 2 | Memory EEPROM | Memory Main Memory | Memory application ROM | Memory boot/ | Onboard I/F JTAG | Onboard I/F microSD card | Operating temperature limit | Operation unit DSW | Power-supply voltage | Rohs | Save humidity range | Save temperature range | Used humidity range | mass | size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Adins1576 |
Available upon quote | 300MHz | AM3357BZCZ30 manufactured by TI (ARM® Cortex®-A8) |
0.54a @24V (including 0.5A @5V supply to extension board, MicroSD power consumption) 1.55a @5V (including 0.5A @5V supply, microSD consumption) |
ACT (yellow), Link (green), RUN (green), ERR (red) | TI manufactured DP83822 X2 | RJ45 X2 | IN X1 (EthernCat®), OUT X1 (EthernCat®) | Freerun/DC mode | 100BASE-TX | Slave |
UART 1 port (TXD, RXD data only) up to 3,686,400bps SPI 1 port (CS2 system), SPI Master, up to 48MHz I2C 1 port, Fast Mode (up to 400kHz) GPIO 4 port |
Parallel bass 16bit asynchronous multi -plastic bus (GPMC) x1 Analog input 4 ports, 200ksps, 100kHzlpf Timer 1 port PWM 1 port Can 1 port UART 1 port (TXD, RXD data only) up to 3,686,400bps SPI 1 port (CS2 system), SPI Master, up to 48MHz I2C 1 port, Fast Mode (up to 400kHz) GPIO 8 port |
64KB (EtherCat slave equipment information storage) | DDR3-SDRAM 800MT/S, 256MB | MicroSD card (not included) | SPI-FLASH Memory 4MB | 1 port (for debugging) | 1 port, SDHC support | 0 to 60 ° C |
8bit For EtherCat® Slave address Settings: bit 1 ~ 7 Boot mode switching: bit 8 |
DC5V ± 5 % or DC15 ~ 40V (Factory Option) It also supports power supply from an extended port. |
2011/65/EU, (EU) 2015/863 | 10 to 90 % (without condensation) | -10 ~ 70 ° C | 30-80 % RH (without condensation) | 35g | 70mm x 75mm |
Customers who viewed this product also viewed
Other products of Advanet
View more products of Advanet
