Operability / safety / temperature control system improves thermos controller HCN-101
IWAKI CO., LTD.
About This Product
■ Adopt liquid crystal panel
The water temperature display is high brightness LED. The temperature setting can be easily set with a touch type. Adopts a liquid crystal panel with a variety of expressive power, and displays settings / measurement status and alarm contents in an easy -to -understand manner. It is also useful for avoiding the risk of trouble due to erroneous operations.
■ Improvement of safety
External inputs are connected to a level sensor at 4 points to prevent water level management, empty heating of heaters, and empty operation of pumps. In addition, when abnormal detection of external input is detected, it is possible to select the operation of a heater or cooler, etc., and maintain other necessary functions even in the event of an abnormality. It is also possible to connect a buzzer or alarm light with 3 points for warning output.
■ Improvement of temperature control accuracy
High -precision temperature control is possible due to hourly PID control. (Only on the heater side) In addition, the temperature sensor input can be measured simultaneously at the same time with 2 points.
* Temperature sensor (thermistor) 3m x 1 is standard attached.
■ Waterproof / dustproof
The body case is made of resin, waterproof and dustproof, and equivalent to IP65. In addition, an optional waterproof outlet is also available.
-
Product
Operability / safety / temperature control system improves thermos controller HCN-101
-
Handling Company
IWAKI CO., LTD.
1 Models of Operability / safety / temperature control system improves thermos controller HCN-101
| Product Image | Part Number | Price (excluding tax) | Alarm output | Cooler side power supply capacity (rated capacity for applicable motor) | Heater side power supply capacity | Input input | Output 1 ~ 4 power supply capacity | Rated output voltage/frequency | Temperature display range | Temperature input | Temperature setting range | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HCN-101 |
Available upon quote |
3 points without voltage contact 1A 250VAC 2A (resistance load) * When the alarm output is used as a voltage output, the power supply source is the same as the output 1 to 4. The power supply capacity is 5.0A for the output of 1 to 4 and the alarm output. |
0.1 ~ 10A (induced load Cosø = 0.4) Maximum power capacity 400W | 0.1 ~ 10A (resistance load) Maximum power capacity 1,000W | 4 points non -voltage contact input or transistor contact input | Total 5.0A maximum power capacity 500W | Single -phase AC100V ± 10% 50/60Hz | -15.0 ~ 155.0 ℃ | 2 -point thermista, PT100 (2 -wire type), PT1,000 (2 -wire type) voluntary selection | 0.0 to 50.0 ° C (initial value) Maximum -10.0 to 150.0 ° C | Single -phase AC100V ± 10% 50/60Hz |
Customers who viewed this product also viewed
Other products of IWAKI CO., LTD.
View more products of IWAKI CO., LTD.
About Company Handling This Product
- Japan
- Since 1956
- 994 employees