Ultra-low-concentration in seawater, Ideal for measuring chlorine measurements
IWAKI CO., LTD.
About This Product
■ Features
・ It is a non -reagent residual chlorine concentration meter dedicated to extreme low concentration measurement corresponding to a wide range of samples such as seawater.
・ The specially developed three -electrode pole residual chlorine sensor is ideal for measuring extremely low -concentration residual chlorine with less zero draft, smaller draft.
-The measuring part has a simple structure without a mechanical drive, and is equipped with a bead spinning cleaning mechanism that can be cleaned on a continuous cleaning of the sensor.
・ The maintenance frequency is reduced by adopting a large -volume measurement unit, which is difficult to clog even with dirty water inspection.
■ Ideal for maximal low -concentration residual remaining chlorine measurement
Because the zero draft is small, it is for low concentration of 0.1 mg/L or less.
■ Simple structure
Easy maintenance
■ Cleaning the sensor continuously
A beads -convergence sensor cleaning mechanism without a mechanical drive has been adopted.
■ Adopts a special structure sensor
A special structure sensor that is less likely to be affected by the coexistent substance during water inspection has been adopted.
■ Measurement can be performed without being affected by turbidity and coloring
Because of the electrochemical formula, measurements can be performed without being affected by the turbidity and coloring of sample water.
■ Operation key
Easy to handle in Japanese
■ Others
・ Measurement unit of large flow that is hard to clog even with dirty water
・ Very small interference of binding molded chlorine
・ Equipped with a self -diagnostic function
-
Product
Ultra-low-concentration in seawater, Ideal for measuring chlorine measurements
-
Handling Company
IWAKI CO., LTD.
1 Models of Ultra-low-concentration in seawater, Ideal for measuring chlorine measurements
| Product Image | Part Number | Price (excluding tax) | Cleaning method | Installation method | Temperature compensation | Water inspection temperature range | cable length |
|---|---|---|---|---|---|---|---|
Re-253C-010Y (ER-100A) |
Available upon quote | Machine polishing and cleaning by beads | Attached to the FC-200A type measurement tank | Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) | About 1m |
Other products of IWAKI CO., LTD.
View more products of IWAKI CO., LTD.
About Company Handling This Product
- Japan
- Since 1956
- 994 employees