Remaining chlorine concentration for bathtub water and hot spring water IR-11-30A/40/43ht/40W sensor
IWAKI CO., LTD.
About This Product
■ Features
・ It is a non -reagent -type three -electrode pole lograph -type residual chlorine meter that mainly measure the residual chlorine of the bathtub water.
・ By selecting the measurement mode, you can measure either a free residual chlorine or a total residual chlorine.
・ Equipped with the following functions that were often requested.
-Sheering to wide power supply voltage
-Ap individual setting of upper and lower limit warning output and control output
-The full scale can be changed
-Plocated part with backlight
■ 3 electrode pole lograph sensor adoption
It is less likely to be affected by interference substances and electricity in water inspection, and can be used for wide range of water inspection.
■ Flow cell
・ IR-11-30A: Overflow-type flow cell for 1.5 ~ 3L/min. It is a simple design with a constant head giving a constant water flow to the sensor and moving the beads without a mechanical drive portion.
・ IR-11-40/43HT/40W: Economical without discarding with inline flow cells. It is necessary to prepare the accessory equipment for use in the inline.
■ Select the measurement of residual chlorine (free / all)
It is possible by switching the measurement mode.
■ Prevention of sensitivity deterioration of sensor by electrode cleaning organizations
1. Continuous polishing and cleaning the electrode surface with bead cleaning without a mechanical drive.
2.4 The electrochemical cleaning function that can be executed by the operation method will cleanse the electrochemical pollution on the electrode surface → these cleaning functions will reduce sensitivity and reduce maintenance frequency.
■ Density control & remote monitoring is possible
-The concentration transmission signal (DC4 ~ 20mA), control contact output, and upper and lower limit warning point outputs allow automatic injection control and remote monitoring of chlorine agents.
・ Simple structure, easy operation & maintenance
■ High temperature type (IR-11-43HT)
Direct measurement is possible up to 75 ° C in water inspection temperature. There is no need for a cooling device like a conventional device.
-
Product
Remaining chlorine concentration for bathtub water and hot spring water IR-11-30A/40/43ht/40W sensor
-
Handling Company
IWAKI CO., LTD.
7 Models of Remaining chlorine concentration for bathtub water and hot spring water IR-11-30A/40/43ht/40W sensor
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Cleaning method | Installation method | Monitor-Flow cell | Temperature compensation | Water inspection temperature range | cable |
|---|---|---|---|---|---|---|---|---|
IR-11 RE-22B (standard) |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning |
Attached to the FC-30A type measurement tank Attached to the FC-40 type measurement tank |
IR-11-30A IR-11-40 |
Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) |
Model: CT4S-005N Cable length: 0.5m, detachment method with connector |
|
IR-11 RE-40B (for binding chlorine measures) |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning |
Attached to the FC-30A type measurement tank Attached to the FC-40 type measurement tank |
IR-11-30A IR-11-40 |
Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) |
Model: CT4S-005N Cable length: 0.5m, detachment method with connector |
|
IR-11 RE-22B-HT (standard) |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning | Attached to FC-43HT type measurement tank | IR-11-43HT | Automatic temperature compensation by thermistor | 35-75 ° C (within temperature compensation range) |
Model: CT4S-005N Cable length: 0.5m, detachment method with connector |
|
IR-11 RE-42B-HT (for binding chlorine measures) |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning | Attached to FC-43HT type measurement tank | IR-11-43HT | Automatic temperature compensation by thermistor | 35-75 ° C (within temperature compensation range) |
Model: CT4S-005N Cable length: 0.5m, detachment method with connector |
|
IR-11 RE-232BC-005N (standard) |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning | Attached to the FC-40W type measurement tank | IR-11-40W | Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) |
Cable integrated type Cable length: about 0.5m |
|
IR-11 RE-432BC-005N (for binding chlorine measures) Action electrode, anti-power |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning | Attached to the FC-40W type measurement tank | IR-11-40W | Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) |
Cable integrated type Cable length: about 0.5m |
|
IR-11 PRE-40-005N comparison electrode |
Available upon quote | Machine polishing and cleaning by beads outbreak and electrochemical cleaning | Attached to the FC-40W type measurement tank | IR-11-40W | Automatic temperature compensation by thermistor | 0 ~ 45 ° C (without freezing) |
Cable integrated type Cable length: about 0.5m |
Click on the part number for more information about each product
Other products of IWAKI CO., LTD.
View more products of IWAKI CO., LTD.
About Company Handling This Product
- Japan
- Since 1956
- 994 employees