Inner valve type pump structural airless unit ALS-433C series
ANEST IWATA Corporation
About This Product
The maximum paint pressure is 21MPa (pressure ratio 30: 1). The maximum discharge is 5.3L/min.
■ Features
The inner valve pump structure is achieved by applying hard chrome plating to the pump cylinder part.
■ Paint (application) Selected list
・ Lacquer (metal / woodworking): ◎
・ Melamine (general metal): ◎
・ Shash paint (vehicle): 〇
・ Futalic acid (vehicle): ◎
・ Water -based paint (architecture): ◎
・ Synthetic resin composition paint (architecture): ◎
・ Acrylic (general metal): ◎
・ Vinyl paint (architecture / metal): ◎
・ Leadan (steel): ◎
・ General rust stop paint (steel): ◎
・ Synthetic resin crocodile (woodworking): ◎
・ Epoxy resin (general metal): 〇
・ Urethane (woodwork): ◎
・ Senior paint (shipbuilding): ◎
・ Rubber chloride (shipbuilding): 〇
・ Tar epoxy (shipbuilding / metal): ✕
・ Single -layer elasticity paint (architecture): ✕
■ Features of plunger pumps
An airless paint is a painting method that adds a high pressure directly to the paint with a plunger pump or a diaphragm pump to spray from a small single hole (nozzle tip) to make it fogged. Although it is inferior to ace sprager, it has excellent thick coating and coating efficiency.
■ We can improve the working environment
Compared to ace spray, the paint scattering is less, so it can be worked hygienically.
■ Painting work time can be used
The coating film is 2 to 3 times the coating of the ace spray by one coating, so that the working time can be greatly reduced.
■ Abundant nozzle chips
A lineup of over 80 types of nozzle chips, you can choose from various paint eruption and pattern width.
-
Product
Inner valve type pump structural airless unit ALS-433C series
-
Handling Company
ANEST IWATA Corporation
1 Models of Inner valve type pump structural airless unit ALS-433C series
| Product Image | Part Number | Price (excluding tax) | Air supply | Maximum discharge | Maximum use pressure | Maximum used air pressure | Paint discharge outlet | Pressure magnification | Standard accessories airless gun format | Standard accessories drain valve | Standard accessories paint hose | Standard accessories paint intermediate filter | Total length x full width x full height | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ALS-433C |
Available upon quote | G1/4B | 5.3L/min | 21MPa | 0.7MPa | G1/4B | 30: 1 | ALG-7 | Attached | 10m (NH-35100) | TF-8B | 430 x 420 x 920mm | 38kg |
Customers who viewed this product also viewed
Other products of ANEST IWATA Corporation
View more products of ANEST IWATA Corporation
About Company Handling This Product
- Japan
- 1,799 employees