Springless structure flow control valve FCV-5 series
ANEST IWATA Corporation
About This Product
■ Eliminates the spring of the solvent route, and the adhesive part is made of stainless steel. Available for water -soluble liquids and high viscosity solvents
・ The FCV-5 series improves the issues of conventional products and can handle various liquids that have not been used before.
・ Since the glid part is stainless steel and fluororesin, it can be used for water -based liquids.
・ We can make use of the advantages of low -sized liquids, adhesive liquids, and water -based liquids. Please use it.
■ Characteristics
・ The paint route has a springless structure.
・ There has been no longer any operation due to the material involved in the pressure adjustment spring.
・ Inside is a one -stroke structure.
・ By excluding the stagnation of the paint and improving the pool of the paint, the cleaning performance has been dramatically improved by excluding the stagnation of the internal paint in one direction (one stroke). * Our company: Reduction of cleaning solution 50 % reduction
* The diameter of the diameter of the diaphragm is different from the ratio of air adjustment pressure and paint secondary pressure (after pressure adjustment). In addition, the greater the difference in the diameter of the diameter of the diaphragm, the more severe adjustment of the paint secondary pressure is possible, but please note that the maximum pressure will decrease.
-
Product
Springless structure flow control valve FCV-5 series
-
Handling Company
ANEST IWATA Corporation
-
Categories
3 Models of Springless structure flow control valve FCV-5 series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Air supply | Diafrum receiving pressure ratio | Guide | Material material material | Maximum air pressure | Maximum flow rate | Paint entrance | Paint exit | Paints maximum primary pressure | Total length x full width x full height | mass | others | type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FCV-5-R1 |
Available upon quote | RC1/8 | 1: 1 | 100ml/min or higher | Stainless steel/fluororesin | 0.6MPa | 2.0L/min | G1/4B | G1/4B | 1.0MPa | 73 × 71 × 81mm (body only) | 580g | Primary side (before pressure adjustment) With circulation port | With damp valve function |
|
|
FCV-5-R4 |
Available upon quote | RC1/8 | 1: 4 | 35 ~ 100ml/min | Stainless steel/fluororesin | 0.6MPa | 2.0L/min | G1/4B | G1/4B | 1.0MPa | 73 × 71 × 81mm (body only) | 580g | Primary side (before pressure adjustment) With circulation port | With damp valve function, small amount/low pressure discharge |
|
|
FCV-5-R8 |
Available upon quote | RC1/8 | 1: 8 | 20 ~ 50ml/min | Stainless steel/fluororesin | 0.6MPa | 2.0L/min | G1/4B | G1/4B | 1.0MPa | 73 × 71 × 81mm (body only) | 580g | Primary side (before pressure adjustment) With circulation port | With damp valve function, small amount/low pressure discharge |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of ANEST IWATA Corporation
View more products of ANEST IWATA Corporation
About Company Handling This Product
- Japan