Laser Scanner J that connects people and security on a face
BEAJAPAN Co., Ltd.
About This Product
You can set the detection area range in 10cm increments vertically and horizontally. It is also possible to set a detection area that avoids obstacles. You can set two detection areas and output the signal separately. You can easily adjust by adjusting the adjustment remote control without using a personal computer. Only at the time of setting, radios are radiated and supported horizontal adjustment.
■ Characteristics
・ Wide detection area
It can be adjusted vertically and horizontally in 10cm increments.
・ Flexible detection area
It is also possible to set the detection area that avoided obstacles.
・ Two areas settings
You can set two areas and output the signal separately.
・ Easy setting with remote control
You can easily adjust by remote control without using a personal computer.
・ Easy adjustment with a visible laser
Only at the time of setting, radiation of visible lasers is supported to support horizontal adjustments.
■ Examples of use
・ As a safety sensor of shutter/garage door. The opening is covered with a face to prevent the object from falling out.
・ As a safety sensor for the parking gate gate. It can be used outdoors without being affected by the road surface.
・ As a trigger center of the car number authentication system. There is no need to set up a pole for receiving light, like an optical pipe.
・ As a safety sensor for the gate. It is highly waterproof and is safe to install outdoors.
・ As vehicle height and vehicle width detection sensor in the parking lot. Detects the body with high accuracy that is less likely to be affected by color and shape.
・ As a safety sensor for automotive carriers. You can use two area patterns to use signals for warning and stop.
・ As a sensor for stopping robot at the manufacturing site. Quickly detects small ones and outputs signals.
・ As a security sensor of museum. We protect multiple artworks in a wide detection area.
-
Product
Laser Scanner J that connects people and security on a face
-
Handling Company
BEAJAPAN Co., Ltd.
1 Models of Laser Scanner J that connects people and security on a face
| Product Image | Part Number | Price (excluding tax) | Approximately used humidity | Cable length | Detection method | Dustproof and waterproof | External dimensions | Generally in contact with contact | Generally power | LED display | Laser characteristics | Leak current | Mounting angle | Mounting bracket horizontal angle adjustment | Mounting bracket vertical angle adjustment | Output holding time | Output residual voltage | Output resistance | Product class | Response time | Roughly contact voltage | Roughly detected area | Rush current | Supply power supply | Switching time | Used peripheral temperature | color | material | output |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Laser Scanner J |
Available upon quote | 0 to 95 % (without condensation) | 10m | Laser scanner (dynamic / stationary detection) | IP65 | 125mm (d) x 93mm (W) x 70mm (H) (mounting bracket+14mm) | 80ma | <5 w |
LED Blue: Power ON LED Orange: Notes LED Green/Red: Non -detected/Green, at the time of detection/red |
Infrared laser: wavelength 905nm; maximum output pulse power 75W Red Laser: Wavelength 650Nm; Maximum output CW Power 3MW |
<10µa | -45 °, 0, 45 ° | -5 ° ~+5 ° (from the δ stamp) | -3 ° ~+3 ° (using hole angle wrench attached to δ) | 500ms | <0.7v ＠ 20ma | Standard 30Ω | Class 1 | Standard 20ms: Up to 80ms | 35V DC / 24V AC | 9.9 m x 9.9 m | 1.8a (up to 80ms @ 35V) | 24V DC +/- 10% | TON = 5ms: Toff = 5ms |
When the power supply is constantly ON: -30 ° C ~ + 60 ° C When turning off the power, 0 ° C ~ + 60 ° C |
black | PC/ASA | Electronic relay 2AB (resistance load) |
Customers who viewed this product also viewed
Other products of BEAJAPAN Co., Ltd.
View more products of BEAJAPAN Co., Ltd.
About Company Handling This Product
- Japan
- Since 2001