Cutting cnc plasma pipe cutting machine for any shape branch tube
Etron System Co., Ltd.

■ One -touch plasma cutting ・ In order to process the supervisor (mother), the cut panel cut parameter can be set in about 15 seconds without teaching after attaching the pipe. You can quickly cut plasma (1 minute to 2 minutes) by starting one touch. ・ Branch tubes can be disconnected in any shape according to the core pipe, such as curves and diagonal lines. ■ Reduced work time From the manual work (pattern ink ink + cutting time), it can be reduced to 1/60 or less, and it is definitely beautiful. ■ Characteristics ・ The shape of the tube junction used in the pipe piping (SUS, gas steel pipe) is automatically calculated by computer operators and cuts immediately. ・ Compared to the gas cutting by manual work, it is possible to make automatic cutting by omitting the troublesome tasks such as creating, inking, and wandering, etc. required to prepare for the work, so the total work of about 1 hour in this device is about 3 minutes in this device. Possible. ・ The operation method is performed with the touch panel. It can be easily started simply by setting the cutting method such as the pipe diameter, length, thickness, vertical / diagonal, etc., and other necessary cutting specifications over a minute. ・ It is possible to set up to 5 pieces at a time for the drilling of the maternal brewing. Automatic cutting can be performed continuously. * Up to 10 continuous cutting number settings are optional specifications. If it is more than that, we will consult your consultation. ・ Maintenance such as refueling of the device is almost required. After use, we would be grateful if you could clean and use the cutting scum, pipe tube, dust, etc. by plasma. ■ About price It does not include transfer costs and operating training costs to the price. It will be charged separately. ■ About branch tube work disconnection ・ The shape trajectory at the edge of the branch tube that is joined to the supervisor pipe is automatically calculated with simple settings, and plasma is cut off by servo motor-X-Z axis control. ・ Compared to manual work, mechanical type, etc., the setup and effort are much more eliminated, increasing the work efficiency. -The setting operation simply enter the following with the touch panel. The cut -shaped trajectory can be automatically calculated and cut. * Cutting type (1. Timpot angle 2. diagonal 3. biased core), branch tube outer diameter, thickness, supervision outer diameter, intersection angle (30 ° to 89 ° arbitrary 1 ° unit), biased amount, etc. ・ There is no need for teaching input other than the above, so you can operate one touch. ・ If you need options other than the above specifications at your request, we will consult separately. Caprice of the supervisor is an optional specification.