Tuning fork for powdered and phalmnal switch SOLIPHANT FTM51-SOLIPHANT FTM51

Tuning fork for powdered and phalmnal switch SOLIPHANT FTM51
Endress+Hauser Group Services AG

About This Product

Level switch with an extension pipe that can be used for fine granular powder. It can be used in dangerous places.

■ Applications
The Soliphant FTM51 is a robust limit switch suitable for using a silo that stores fine grain or powder -like powder, and can be used even in low powder density. Because of the variety of specifications, this device can be used for a wide range of applications. In addition, we have acquired various authentications for use in dangerous places where dust and gas are generated.

You can select a stainless steel housing version with a surface polished and tric lamp connection, or a teflon -coated tuning fork and aluminum housing version. It is maintenance -free and is mainly applied to applications such as grains, flour, cocoa, sugar, feed, powder paint, and chalk.

■ Fine granular or powder -shaped level switch for powdered body
・ Process connection: screw -included, flango, smooth connection (tric lamp)
・ Process temperature: -50 ~+280 ° C (-60 ~+540 ° F)
・ Process pressure: -0.1 ~+2.5 mpa (-14.5 ~+360 PSI)
・ Sensor length: 300mm to 4,000mm
・ Sensor material: SUS 316L equivalent (3.2 µm, 0.8 µm, PTFE coating, ETFE coating)
・ International explosion -proof certification

■ Advantages
・ Compatible with SIL2 (IEC 61508)
・ There are no mechanical movable parts and no maintenance is required
・ Measurements are possible not affected by adhesive or external vibration
・ Various electronic inserts. For example, prepared namur, relay, syllista and PFM signal output so that the compatibility with the plant control system can be compatible.
・ You can select the setting of self -diagnostic function for adhesion and corrosion, setting powder density setting and switching delay can be selected by the switch.
・ Surface polishing and coating sensor can be selected
・ Detection function of incidental and corrosion

Model
There are 1 models for this product.

Product
Tuning fork for powdered and phalmnal switch SOLIPHANT FTM51

Handling Company
Endress+Hauser Group Services AG

*Please note that we may not be able to accommodate sample requests.

1 Models of Tuning fork for powdered and phalmnal switch SOLIPHANT FTM51

Product Image	Part Number	Price (excluding tax)	Ambient temperature	Characteristics / application	Design certification	Features	Major liquid portion	Measurement principle	Minimum density	Power / communication	Process connection	Process pressure / maximum overpressure limit	Process temperature	Safety certification	Sanitari process connection	Selection item	Sensor length	Standard conformity certificate/authentication	communication	component
	SOLIPHANT FTM51	Available upon quote	-50 ° C ... 70 ° C (-60 ° f ... 160 ° f)	Fine granular powder and powder level limit switch Particle size: <= 10 mm (<= 0.39 in) Folk sensor No calibration required No effects of incidental or external vibration Robustness You can check the value of the switch from the outside Elongation pipe	EN 10204-3.1	Adhesion and corrosion detection Separation type 3 Temperature version available SIL 2	chooseable: SUS316L equivalent 3.2 µm SUS316L equivalent 0.8 µm SUS316L equivalent PTFE coating (for adhesion prevention) SUS316L equivalent ETFE coating (for preventing corrosion)	Tuning fork	Standard tuning fork: 10 g/l Short tuning fork: 50 g/l	DC PNP 3 line AC 2 line AC 19 ... 253 V / DC 19 ... 55 V Relay contact 2 points 8/16ma Namur PFM	screw R 1 1/2 " 1 1/4 "NPT 1 1/2 "NPT EN flange DN50 ... DN100 ASME Flange 2 "... 4" JIS Flange 50A ... 100A	Vacuum ... 2.5 mpa (Vacuum ... 360 PSI)	-50 ° C ... 280 ° C (-60 ° f ... 540 ° f)	SIL	Triclamp ISO2852	Glass cover Temperature spacer EN10204-3.1	300 ... 4000mm (12 ... 155 ") (6000mm / 230 "is a necessary inquiry)	ATEX, FM, CSA C/US, IEC EX, JPN, Inmetro, Nepsi, EAC	DC PNP 2 line AC Sirista DPDT relay 8/16ma Namur PFM	PFM: FTL325P, FTL375P Namur: FTL325N, FTL375N