Water quality analytical oxygen sensor MEMOSENS COS81D corresponding to water quality analysis parameters
Endress+Hauser Group Services AG
About This Product
Memosens optical oxygen sensor that is ideal for life science, pharmaceutical and food industry's sanitar application
◾️ Application
Memosens COS81D is an optimal dissolved oxygen sensor for sanitar applications such as fermentation and inert. High -precision, high -term stability measurement and constant self -monitoring function provide highly reliable measurements, and high quality products and optimized product yields are guaranteed.
Memosens COS81D is ideal for molten oxygen measurement in the following applications, which have a very severe sterilization requirements.
·fermentation
・ Inateive
・ Drinking water production
Memosens COS81D dissolved oxygen sensor, which has obtained international explosion -proof authentication such as ATEX and IECEX, is suitable for use in dangerous places. A pharmaceutical certificate book with the sensor serial number is provided.
◾️Anucial
-Sanita design that complies with EHEDG and ASME BPE (including USP class VI certification and FDA compliant) prevents cross -pollution and meets all GMP and GLP requirements.
・ This sensor can be used for a wide range of applications, from bench top culture tanks to manufacturing process applications. It provides a complete consistency with the process lab results, starting with the first test in the lab and reaching the final large -scale process.
・ Secure the process operation time for longer because the sensor replacement is possible instantly
You can replace the pre -proofled sensor in the lab with a plug and play with the sensor in the process. You can start the measurement immediately because there is no need for a polar time.
・ The built -in reference LED to correct the aging of the LED for measurement. A highly reliable measurement value is guaranteed throughout the batch manufacturing.
・ Reduce maintenance man -hours
MemosensCOS81D has no difficult electrolyte or liquid film to be treated carefully. All you have to do is exchange the sensor cap and make a calibration.
・ Memosens COS81D saves important sensor information and process data for intelligent sensor heads.
MEMOBASE PLUS CYZ71D Sensor Management Software uses this data to record all life cycles of the sensor and minimize paperwork with complete traceability.
・ CIP/SIP cleaning and auto crave, explosion -proof certification
■ Measurement principle
Oxygen reaction molecules (markers) are incorporated into the optical activity layer (fluorescent layer). This fluorescent layer is in contact with the measurement, and the Faculty of Sensor is pointed to the back of the fluorescent layer. The Faculty of Sensor Hikari is transmitted to the pulse to the fluorescent layer with a green light emission, and the marker responds the pulse with red light. The sustainability and strength of the response vary depending on the dissolved oxygen amount and partial pressure.
-
Product
Water quality analytical oxygen sensor MEMOSENS COS81D corresponding to water quality analysis parameters
-
Handling Company
Endress+Hauser Group Services AG
-
Categories
1 Models of Water quality analytical oxygen sensor MEMOSENS COS81D corresponding to water quality analysis parameters
| Product Image | Part Number | Price (excluding tax) | Additional certification | External dimensions | Material | Measurement principle | Measurement range | Mounting | Process pressure | Process temperature | Temperature sensor | connection | structure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Memosens COS81D |
Available upon quote |
3.1 Material certificate ASME BPE-2016 Rules (EC) No. 1935/2004 |
Vehicle: 12 mm (0.47 INCH) Shaft length: 120, 220, 360, 420 mm (4.72, 8.66, 14.2, 16.5 INCH) |
Senshaft: Stainless steel 1.4435 Process seal: FKM (USP <87>, <88> Class VI and FDA) Seal/O -ring: EPDM, FFKM (USP <87>, <88> Class VI and FDA) |
Optical type dissolved oxygen measurement |
0.004 ~ 30 mg/L 0.05 ~ 330 %SAT 0.1 ~ 700 HPA |
Standard process connection PG 13.5 Can be attached to standard PH assembly |
2 kpa ~ 1.3 mpa (absolute pressure) (0 ~ 190 PSI) |
0 ~ 140 ° C (32-284 ° f) |
PT1000 (Din IEC 60751 compliant class A) | Memosens-Connection Head | Optical, stainless steel |
Customers who viewed this product also viewed
Other products of Endress+Hauser Group Services AG
View more products of Endress+Hauser Group Services AG
About Company Handling This Product
Endress+Hauser Group Services AG
- United States of America