Product
Half -temperature hard -curing wrapping resin technique 4000 / techNovit® 4000Handling Company
Musashino Denshi, INC.Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | 25mm | 30mm | 40mm | 50mm | Bending strength (n/mm²) | Casting time (22 ° C) | Density (g/cm³) Din53479 | Hardening highest temperature | Line contraction rate (%) | Precautions when mixed | Preservation period | Refractive index | Shock strength (KJ/m²) Din13907 | Solubility | Steel ball pushing hardness (N/mm²) DIN53456 | Volume shrinkage rate (%) | Water absorption rate (vol.%) DIN53495 | Working hours | color | mixing ratio | storage temperature |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TechNovit® 4000 (powder) |
Available upon quote | 6.5g | 9.3G | 16.2g | 24.4G | 50 | 18 minutes to 24 minutes | 1.57 | 122 ℃ | 2.7 | Mix the solution I (syrup i) and the solution II (syrup II) first | Three years | - | 1.5 | Dissolve | 103 | 6.2 | 2.7 | 4 minutes | White opaque | 0.4 | 25 ° C | |
Technovit® 4000 (solution I) |
Available upon quote | 6.5g | 9.3G | 16.2g | 24.4G | 50 | 18 minutes to 24 minutes | 1.57 | 122 ℃ | 2.7 | Mix the solution I (syrup i) and the solution II (syrup II) first | Three years | - | 1.5 | Dissolve | 103 | 6.2 | 2.7 | 4 minutes | White opaque | 0.4 | 25 ° C | |
Technovit® 4000 (solution II) |
Available upon quote | 3.3g | 4.7G | 8.1g | 12.2g | 50 | 18 minutes to 24 minutes | 1.57 | 122 ℃ | 2.7 | Mix the solution I (syrup i) and the solution II (syrup II) first | Three years | - | 1.5 | Dissolve | 103 | 6.2 | 2.7 | 4 minutes | White opaque | 0.2 | 25 ° C | |
Technovit® 4004 (powder) |
Available upon quote | 8.0g | 11.0g | 20.1g | 30.1g | 95 | 9 minutes to 12 minutes | 1.14 | 110 ° C | 2.25/2.08/1.80 |
The boiling point is low and the bubbles occur during hardening By using a pressure vessel techno mat It is possible to embed while keeping high transparency |
Three years | Monomer = 1.420/ polymer = 1.438 | 6.4 | Swell | 137 | 1: 1 = 6.75/ 1.8: 1 = 5.8/ 2.3: 1 = 5.4 | 0.38 | 2 minutes to 3 minutes | Transparent | 0.63 | 25 ° C | |
Technovit® 4004 (solution) |
Available upon quote | 4.7G | 6.8g | 12.3g | 18.1G | 95 | 9 minutes to 12 minutes | 1.14 | 110 ° C | 2.25/2.08/1.80 |
The boiling point is low and the bubbles occur during hardening By using a pressure vessel techno mat It is possible to embed while keeping high transparency |
Three years | Monomer = 1.420/ polymer = 1.438 | 6.4 | Swell | 137 | 1: 1 = 6.75/ 1.8: 1 = 5.8/ 2.3: 1 = 5.4 | 0.38 | 2 minutes to 3 minutes | Transparent | 0.38 | 25 ° C | |
TechNovit® 4006 (powder) |
Available upon quote | 8.1g | 11.2g | 20.4g | 30.3G | 105 | 9 minutes to 13 minutes | 1.14 | 99 ℃ | 2.25/2.08/1.80 | By using a pressure container techno mat, it is possible to embed with high transparency. | Three years | Monomer = 1.422 | 5.8 | Swell | 155 | 1: 1 = 6.75/ 1.8: 1 = 5.8/ 2.3: 1 = 5.4 | 0.3 | 4 minutes | High transparency | 0.63 | 25 ° C | |
Technovit® 4006 (solution) |
Available upon quote | 4.7G | 6.8g | 12.3g | 18.1G | 105 | 9 minutes to 13 minutes | 1.14 | 99 ℃ | 2.25/2.08/1.80 | By using a pressure container techno mat, it is possible to embed with high transparency. | Three years | Monomer = 1.422 | 5.8 | Swell | 155 | 1: 1 = 6.75/ 1.8: 1 = 5.8/ 2.3: 1 = 5.4 | 0.3 | 4 minutes | High transparency | 0.38 | 25 ° C | |
Technovit® 4071 (powder) |
Available upon quote | 8.0g | 11.0g | 20.1g | 30.1g | 94 | 5 minutes to 7 minutes | 1.19 | 108 ° C | 1.93 | - | Three years | Monomer = 1.439 | 6.1 | Swell | 144 | 5.8 | 0.47 | 1 minute to 2 minutes | Green translucent | 0.63 | 25 ° C | |
Technovit® 4071 (solution) |
Available upon quote | 4.7G | 6.8g | 12.3g | 18.1G | 94 | 5 minutes to 7 minutes | 1.19 | 108 ° C | 1.93 | - | Three years | Monomer = 1.439 | 6.1 | Swell | 144 | 5.8 | 0.47 | 1 minute to 2 minutes | Green translucent | 0.38 | 25 ° C | |
TechNovit® 5000 (powder) |
Available upon quote | - | - | - | - | 85 | 7 minutes to 12 minutes | 2.85 | 125 ℃ | 2.3 |
It has viscous for 1 minute after mixing By tapping the mold lightly while viscous, the bubbles generated inside the resin can be removed. |
Three years | Monomer = 1.458/ polymer = 1.434 | 5.0N/mm² | Swell | - | 7.1 | 2 | 1 minute | brown | 0.63 | 25 ° C |
Click on the part number for more information about each product