About This Product
■ Characteristics
・ It is an excellent effect as a safety measure when the hands or fingers approach within the danger limit and the materials must be protected and processed.
・ Many companies have begun to incorporate them as a safety auxiliary device for press brakes.
・ "It is really easy to use and you can work with peace of mind."
・ Features The conventional safety device was poorly working and could not work, but by installing a laser -type safety auxiliary device, the dangerous area has become much smaller than before.
・ The laser rays detect a 2 mm object.
・ Even if the ingredients are inserted, it can be processed without stopping the machine. In addition, small items can be processed. The positioning of the sensor is also easy.
・ Since the mold is replaced, it can be moved with one touch, so you will not have to worry about replacement.
・ The LB100 is a safety auxiliary device. It is not a safety device acquired by the certification.
■ Overview
The safety auxiliary device LB100 for the press brake detects the finger by the laser rays of the single optical axis.
The laser rays emitted from the laser floodlight are received by the light receiver. The safety relay in the control box is activated by blocking the laser rays between the laser floodlight and the light receiver. Suddenly stop the slide of the press brake by connecting the output signal of the safety relay to the press brake stop circuit.
However, the fact that the slide is actually stopped is performed by the function of the press brake. Set the light axis of the laser rays to the location of 2 to 3 mm from the top of the material (front side). In the case of a hydraulic type, the slide of the press brake stops when the laser rays are shielded when descending at high speed. If the slide of the press brake is low -speed descent and the gap is 6 mm or less, the laser rays are invalid, and even if the laser rays are shielded, the slide does not stop, so bending can be performed. (Half -speed invalid)
Also, if the slide rises, the slide does not stop even if the laser rays are shielded (rising).
(Please contact us as it depends on the hydraulic circuit. In the case of a mechanical type, the detection is set according to the angle.)
It is possible to attach a ray bypass circuit as an option. If the ray bypass circuit is suddenly stopped at a high speed descent, press the operation preparation button (optional) in the driving preparation box will be released.
-
-
Product
Laser type press brake safety auxiliary device LB-100