Easy-to-use USB control software Smart-USB Plus (USB2.0 compatible) CX-CARD2X System Development Board
Prime Systems Co., Ltd.
About This Product
■ Bestseller CX-CARD2 Succession model of system development board
･ The connector specification is exactly the same as the conventional product and does not affect existing products.
･ It is a system development board that can be operated for a long time.
･ A total of 256 I/O voltage can be set and operated at the same time.
･ Model equipped with 10CL080YF780C8G
CX-Card2X is a system development board equipped with an easy-to-use USB2.0 interface and the latest FPGA Cyclone10 of Intel (Altera). From the control application software or user original app, you can instantly use the user circuit to the FPGA via USB.
In addition, hardware register control in FPGA and data transfer control between PCs and boards can be easily done. In addition, the interface voltage with the external board can be set from 1.2V to 3.3V using the dip switch on the board.
When developing a new substrate, when the FPGA and USB interface are installed, the development period will be longer and a lot of development costs are required. By incorporating CX-Card2x into the final product, complex FPGA surrounding circuits and USB interfaces can be realized immediately, so that the development cost of measurement and control equipment can be reduced.
-
Product
Easy-to-use USB control software Smart-USB Plus (USB2.0 compatible) CX-CARD2X System Development Board
-
Handling Company
Prime Systems Co., Ltd.
1 Models of Easy-to-use USB control software Smart-USB Plus (USB2.0 compatible) CX-CARD2X System Development Board
| Product Image | Part Number | Price (excluding tax) | Baseboard size / board livision | FPGA development tool | Product package | Software specifications | USB | User I/O Number (High Speed> 100MHz) | User I/O number (low speed ≦ 100MHz) | compatibility | memory | utility |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CX-CARD2X / 80C8 |
$ 825.00〜 | W108 X D82 (mm) 10 -layer domestic PBFREE / REV3.0 | Free development tools (QUARTUSPRIME free development tools (QUARTUSPRIME)) are available. | USB cable (TYPEA-B), circuit diagram, control application, sample FPGA project, software specification | Compatible with Linux (Ubuntu, Raspberrypi) after Windows 10 or later |
Type-B connector: USB2.0 High Speed support, USB control, and bulk transfer Effective data transfer rate average 40MB/s |
200 pieces (LVDS 24ch can be set possible) for single end 1.2V to 3.3V. 50Ω impedance has been consistent. The 120pin mesanine connector can be stored in two, and at the same time, three types of I/O voltage can be set. |
56 (LVDS 26ch settings possible) 50Ω impedance. 34pin pin header contains two pieces, and each connector I/O voltage can be set. |
The same connector specification as CX-Card2 with the same performance | 8mbit asynchronous SRAM IS61WV51216EDBLL-10TLI (512K x 16bit access speed 10NS) |
・ I2C port 1ch (3.3V system) It can be controlled unrelated to FPGA. ・ RS-232C ・ 8bit-led, 4bit-dipsw, 1bit-tactsuw |
Customers who viewed this product also viewed
Other products of Prime Systems Co., Ltd.
View more products of Prime Systems Co., Ltd.
About Company Handling This Product
- Japan
- Since 1998
- 3 employees