Controller CB-22 for delivery warning system
OPTEX CO., LTD.
About This Product
It is a controller for control the sensor signal used for the delivery warning system.
In order to build a delivery warning system, you need a vehicle detection sensor and a caution lighting light in addition to the controller.
* Depending on the vehicle detection sensor used, some systems that do not require a controller or a separate power supply.
■ Two zones are alert individually according to the situation
In the evening, it is easy to switch with a single switch to a that notifies the intruder with an alarm sound, and in the daytime to notify the visitors with chime sounds.
Moreover, we are alerted individually for two zones.
■ Expendation attention, large -capacity contacts that can control lights and rotating lights
By connecting a lamp or bell, it is alerted with light and sound.
■ Other features
･ Equipped with a direction identification function
･ Built -in delayed timer function that does not require external switches
･ Output time about 2 seconds to about 5 minutes (off -direi tiima)
■ Depending on the installation environment, you can choose the delivery warning system from the following.
･ Installation type installed on both sides
･ Outdoor on both sides (one -sided battery type)
･ Installation type (for 2 lanes)
･ Installation type (for one lane)
･ Upper outdoor installation type
･ Indoor ceiling hanging type (altitude model)
･ Indoor ceiling hanging type (general -purpose model) ･ Visit mode variable volume
For more information, please contact us or request a quote.
-
Product
Controller CB-22 for delivery warning system
-
Handling Company
OPTEX CO., LTD.
1 Models of Controller CB-22 for delivery warning system
| Product Image | Part Number | Price (excluding tax) | Contact output 1 | Contact output 2 | Installation location | Late time time time | Number of warning zones | Operating temperature limit | Operation display light | Output time | Power supply for sensor | Power-supply voltage | Signal sound (volume) | input | mass | option | power consumption |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CB-22 |
$ 165.00〜 | No voltage output 1c 300W or less (resistance load) | Voltage output: 1A DC24V 0.1A or less | indoor | About 60 seconds at the time of vigilance set approximately 30 seconds | 2 zone | -10 ~ + 40 ° C. Emergency power supply BK2-12 Only BK2-12 is 0 ° C to +40 ° C | Walling: Lighting (red), blinking at the time of detection (including self -diagnosis, operating memory) visitors: Lighting (green), flashing at the time of detection | About 2 seconds to about 5 minutes (variable) | DC12V 330m | AC100V ± 10% 50 / 60Hz | Warning: Pepoh (Automatically, the maximum volume is automatically about 75db (1m ahead) visit: Zone 1 "Ping Pong", Zone 2 "Piropilo" (Maximum volume variable) | Zone 1: N.C. / N.O. Switching input x 1 Zone 2: N.C. / N.O. Switching input x 1 | Approximately 950g | ・ Emergency power supply: Maintain the vigilance state of the controller CB-22 when a BK2-12 power outage. Keis switch: NS-260A-S set / Switch that can remotely control reset / warning bell: BL-1 warning bell, red type | 17w |
Other products of OPTEX CO., LTD.
View more products of OPTEX CO., LTD.
About Company Handling This Product
- Japan
- Since 1979