Vehicle detection sensor for the delivery warning system OVS-01GTP (J)
OPTEX CO., LTD.
About This Product
It is a vehicle detection sensor that prevents encounters when participating from factories and parking lots.
Recognize the detection order of two sensors with the controller, and alert them only when vehicles participate.
It is a ministry construction because it is a microwave FMCW sensor installed on one side.
To build a delivery warning system, in addition to two sets of vehicle detection sensors, a controller CB-22, a power supply equipment OVS-6000R, and a lantern ST-02 are required.
* Expending attention light can be substituted with commercially available rotating lights (AC100V).
■ Underground embedded / No ground installation required
There is no need to embed or install it on the ground, like a loop coil sensor or an electromagnetic sensor. Contribute to the shortening of the construction period.
■ It is resistant to rain, wind and snow
With the automatic correction function of environmental change, it can be used outdoors with confidence.
■ No influence of vehicle color
There is no effect on the body color of the car due to the operation principle.
■ Only vehicles detect
By canceling function, only vehicles can be detected.
* It may differ from the actual operation depending on the installation environment and the setting contents.
-
Product
Vehicle detection sensor for the delivery warning system OVS-01GTP (J)
-
Handling Company
OPTEX CO., LTD.
1 Models of Vehicle detection sensor for the delivery warning system OVS-01GTP (J)
| Product Image | Part Number | Price (excluding tax) | At the time of automatic display light | At the time of display light sensor reset | Cancellation function | Current consumption current | Detected car speed | Detection distance microwave sensor | Detection distance ultrasonic sensor | Detection method | Equipment setting Non -detected sensitivity | Equipment setting Non -detected sensitivity up time | Equipment setting microwave sensor detection distance | Equipment setting off Delay | Equipment setting operation type | Equipment setting output 1 contact switching | Equipment setting sensitivity (microwave sensor) | Equipment setting ultrasonic sensor detection distance | Indicator light normal | Installation height | Installation location | Power-supply voltage | Protective structure | Quality | Sensor angle adjustment | Sensor frequency | Used environment humidity | Used environment temperature | When checking the indicator lighting area | accessories | output | response speed |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
OVS-01GTP (J) |
Available upon quote | Preparation: Blue blinking (late), correction: Blue blinking (speed), ultrasonic detection error: red blue blinking | Reset completion: Yellow lighting (2 seconds) | Yes (excluding when setting sensitivity level 5) | When the heater is operating: Up to 200mA, when the heater is not activated: Up to 80mA (at 24V) | 2-20km / h | 0.8 to 5.5 m variable | 0.1-1.5 m fixing | Microw wave (Doppler, FMCW) / Ultrasonic combination method | Cut / low / medium / high | 0.5 / 1/2 / 4 seconds | 2 / 2.5 / 3.5 / 4.5 / 4.5 / 5.5 m | 0.5 / 1/2 / 4 seconds | 45 ° installation / 90 ° installation | N.O. / N.C. | Level 1-5 | Cut / 0.6 / 0.8 / 1 / 1.5 m | When standing: Green lighting, when detection: red lighting, when bad environment: Green blinking (late) | 500 (~ 530) m m (distance between the road surface and the lower surface of the main body) | Indoor / outdoor pole installation (pole diameter ф 60.5mm) | DC12-24V | IP65 | Approximately 770g (including main body accessories) | Left and right direction: ± 30 ° (5 ° chopped) | Microw wave sensor: 24 GHz, ultrasonic sensor: 56 kHz | 95 % max. (But no condensation) | -20 ~ + 50 ° C C | When non -detection: Green flashing, microwave wave sensor: When detection of yellow flashing ultrasonic sensor: Purple flashing, microwave / ultrasonic sensor detection: red flashing | Hardware fixing screw x 4, construction manual side cover, side cover mounting screw x 4, pole mounting bracket x 2, bracket fixing screw x 4, construction manual | No voltage output DC30V, 0.3A (Output 1: N.O. / N.C. Switching, output 2: N.O. Fixed) | 500 msec |
Customers who viewed this product also viewed
Other products of OPTEX CO., LTD.
View more products of OPTEX CO., LTD.
About Company Handling This Product
- Japan
- Since 1979