Okumura Machinery Co., Ltd.'s Company Profile and Products

■An automatic feed mode has been added to the sizing device to allow quick step-cutting. The "APKS3000 model" is a model that a...

• Measuring Equipment

• Length Measuring Machines

■Easy to operate. This is an automatic sizing device that can be attached to all cutting machines and is compatible with the ``...

• Measuring Equipment

• Length Measuring Machines

■Can be installed on all cutting machines. Low-cost, high-precision automatic sizing device The "APKS1000 model" is an automati...

• Measuring Equipment

• Length Measuring Machines

■Automatic sizing device that achieves high rigidity and precision. Can be installed on cutting machines other than ours "APK10...

• Measuring Equipment

• Length Measuring Machines

■This is a cutting machine that can cut long materials quickly, safely and accurately. Safe work can be done as the cover is fi...

• Machining / Machine Tools

• Cutting Machinery

■By entering the angle and dimensions, the sizing ruler settings can be automatically calculated. "Kakudo Sensei" is angle calc...

• Development & Design

• Embedded Software

■The circular saw is covered with a cover and can perform cutting work at high speed and safely. Copper bar cutting machine tha...

• Machining / Machine Tools

• Cutting Machinery

The workpiece slip detection system is a device that uses a slip detection sensor attached to the workpiece to monitor the posi...

• Sensors

• Position Sensors

■Manual digital sizing device compatible with all cutting machines improves accuracy and efficiency The "SD series" is a high-p...

• Measuring Equipment

• Length Measuring Machines

■The circular saw is covered with a cover and can perform cutting work at high speed and safely. Undercut cutting machine for a...

• Machining / Machine Tools

• Cutting Machinery

■Energy-saving and compact cutting machine with a built-in simple dust collector now compatible with the [Tax system for streng...

• Machining / Machine Tools

• Cutting Machinery

■Precision cutting, safe operation - challenge the angle with the axis tilting plate UCA-SD300 A compact machine with a tilting...

• Machining / Machine Tools

• Cutting Machinery

■Aluminum plate cutting machine with automatic sizing device for high-mix, small-lot production This is an aluminum plate cutti...

• Machining / Machine Tools

• Cutting Machinery

■Leave the aluminum cutting to us, from shapes to pipe rods and Max500 square plates. Semi-automatic cutting machine with a fro...

• Machining / Machine Tools

• Cutting Machinery

■A revolution in aluminum cutting, no scratches, no noise, and no costs. Solve your cutting problems with Okumura Machinery's s...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine that is equipped with a blade vertical adjustment mechanism and can perform grooving. ・One-shot ...

• Machining / Machine Tools

• Cutting Machinery

■Equipped with a material pusher to automate circular saw cutting work This machine is a device that automatically cuts aluminu...

• Machining / Machine Tools

• Cutting Machinery

■Aluminum cutting, a new frontier of precision and safety. Opening up the future with UCA-2D400 "UCA-2D400" is an innovative 3D...

• Machining / Machine Tools

• Cutting Machinery

■Safely and reliably cuts aluminum sashes at angles. Innovate work efficiency with undercut type chip saw cutting machine The "...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine with table rotation + blade tilting type, suitable for angle cutting of aluminum shapes. Accurate...

• Machining / Machine Tools

• Cutting Machinery

■JCU-510D realizes precise angle cutting with free rotation of up to 60 degrees left and right. Compact design allows cutting o...

• Machining / Machine Tools

• Cutting Machinery

■One cut of height 120mm x width 300mm 45 degrees. Circular saw cutting machine that can handle curved corners with free angle....

• Machining / Machine Tools

• Cutting Machinery

■Free cross cut saw that can cut 120 mm in height x 450 mm in width in one shot, and can also cut at angles and also raise and ...

• Machining / Machine Tools

• Cutting Machinery

■Manual radial arm saw. Commonly known as "sasher" in sash shops. Beautiful cut surface with a chip saw. Can also cut wood and ...

• Machining / Machine Tools

• Cutting Machinery

■A radial saw whose main body is entirely made of thick cast iron, allowing you to make beautiful cuts easily and accurately. `...

• Machining / Machine Tools

• Cutting Machinery

■The "UCA-DM400 model" achieves precise angle cutting by turning up to 60 degrees left and right. Supports a wide variety of al...

• Machining / Machine Tools

• Cutting Machinery

■Automatic undercut saw that efficiently cuts large quantities of aluminum shapes and solid materials. The carbide circular saw...

• Machining / Machine Tools

• Cutting Machinery

■Two axes can be cut simultaneously with a maximum distance of 6,000 mm. Can cut up to 500mm width at one time with horizontal ...

• Machining / Machine Tools

• Cutting Machinery

■Free automatic angle cutting machine that can automatically rotate the table up to 63 degrees left and right. Compact design, ...

• Machining / Machine Tools

• Cutting Machinery

■ Revolutionize work efficiency with automation of angle cutting. Precision 45 degree cutting realized by UCA-DM500 The "UCA-DM...

• Machining / Machine Tools

• Cutting Machinery

■Significantly shortens cutting time and reduces work time. Thick plates can be transported with little force. Improves work ef...

• Machining / Machine Tools

• Cutting Machinery

■Aluminum plate cutting machine with improved functions such as shortened cutting time, high precision, and improved working en...

• Machining / Machine Tools

• Cutting Machinery

■Equipped with fast forwarding function to reduce air cut time Circular saw cutting machine with fast forwarding function "UCK-...

• Machining / Machine Tools

• Cutting Machinery

■ Cutting plate material with maximum thickness of 70 mm x width of 1,000 mm in one shot at high speed The "UCTS-K1000A" is a d...

• Machining / Machine Tools

• Cutting Machinery

■Cutting 60mm thick x 600mm wide aluminum plate in one shot at high speed The ``UCTS-K600 type'' is a dedicated circular saw ma...

• Machining / Machine Tools

• Cutting Machinery

■Significantly reduced cutting time compared to conventional machines. This model strives to further improve workability by enh...

• Machining / Machine Tools

• Cutting Machinery

■A large amount of cutting powder generated when cutting aluminum plates can be collected directly into flexible container bags...

• Cleaning Agents & Equipment

• Dust Collectors

■High-speed cutting of 50mm square resin moldings (shapes) in one shot. Cuts PVC resin angles, pipes, moldings, etc. at high sp...

• Machining / Machine Tools

• Cutting Machinery

■One-shot high-speed cutting of maximum 200A pipes Cuts PVC and PP molded materials (resin sashes, plumbing pipes, etc.) at hig...

• Machining / Machine Tools

• Cutting Machinery

■High-precision free-angle radial saw for cutting grooves on pallet packaging materials and returnable boxes. NRG2-M370 is a hi...

• Machining / Machine Tools

• Cutting Machinery

■Introducing an air-hydro type muntin groove processing machine with an installed cutter outer diameter of 205 mm to 255 mm. "N...

• Machining / Machine Tools

• Cutting Machinery

■Front armless type improves work efficiency. Upper saw down cutting allows for accurate and beautiful cut surfaces on the faci...

• Machining / Machine Tools

• Cutting Machinery

■Accurate positioning and simple input procedures using a uniquely developed dedicated microcomputer The "VM22 model" is a V-cu...

• Machining / Machine Tools

• Cutting Machinery

■This is a processing machine that creates U-grooves to bend aluminum composite plates. U-cut bending is now possible on plasti...

• Machining / Machine Tools

• Cutting Machines

■Introducing a processing machine that carves grooves on the surface of aluminum composite plates to bend them. The self-propel...

• Machining / Machine Tools

• Cutting Machines

■Able to cut thick shapes with high output motor. Front armless type with no burrs on the surface material improves work effici...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine that cuts surface materials with a beautiful finish using the Box Motion (BM) method, where the r...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine that can produce up to 45 degrees of shaft inclination and does not produce burrs on face materia...

• Machining / Machine Tools

• Cutting Machinery

■A multifunction machine that combines a radial saw groove processing machine and a cross cut saw cutting machine. For lining, ...

• Machining / Machine Tools

• Cutting Machinery

■High-speed positioning and high-speed cutting improve cutting work productivity. - Significantly improves productivity by spee...

• Machining / Machine Tools

• Cutting Machinery

■High-speed cutting of post-formed long panel materials A running cross cut saw is a cutting machine that uses a circular saw (...

• Machining / Machine Tools

• Cutting Machinery

■A multifunction machine that combines a radial saw groove processing machine and a cross cut saw cutting machine. For lining, ...

• Machining / Machine Tools

• Cutting Machinery

■Characteristics of UCA-CHMS3000 type carbide circular saw cutting machine with horizontal chuck type automatic feed ・High-spe...

• Machining / Machine Tools

• Cutting Machinery

``ACPKF-300 type (front armless type)'' is a fully automatic cutting machine with an automatic sizing feeding device. The cutti...

• Machining / Machine Tools

• Cutting Machinery

■Two-axis groove processing machine with automatic feed that processes the top and bottom grooves of partition panel materials ...

• Machining / Machine Tools

• Cutting Machinery

■Innovative undercut saw type groove processing machine pursuing safety and efficiency The UCRA-300J model automates the machin...

• Machining / Machine Tools

• Cutting Machines

■Easily transfer programs created in the office to a USB memory. Significantly reduces the time required to create complex groo...

• Development & Design

• Embedded Software

■The fully automatic radial saw is a heavy-duty grooving machine with a main shaft equipped with a grooving cutter that automat...

• Machining / Machine Tools

• Cutting Machinery

■Cutting and chamfering can be done in one cut. Running saw specifically for siding boards This is a circular saw cutting machi...

• Machining / Machine Tools

• Cutting Machinery

This is a circular saw cutting machine exclusively for ceramic exterior wall materials. Highly rigid top running allows for bea...

• Machining / Machine Tools

• Cutting Machinery

■D2 type tipped saw that focuses on sawing with less burrs. Suitable for cutting thin-walled aluminum building material sashes ...

• Machining / Machine Tools

• Cutting Machinery

■Strong cutting force, beautiful cutting surface, and accurate cutting precision. Fully automatic running cut and sew The ``Mir...

• Machining / Machine Tools

• Cutting Machinery

■Accurate positioning is possible. A cutting machine that automatically rotates left and right ±60 degrees. The "JSKH-DM455 mod...

• Machining / Machine Tools

• Cutting Machinery

This is a tenon removal machine (end notch machine) for aluminum sashes. Achieves beautiful cut surfaces with no burrs using a ...

• Machining / Machine Tools

• Chip Saws

It has high straightness and removes chips smoothly. D4 tipped saw ideal for thick aluminum extrusions, bars, and plates. The D...

• Machining / Machine Tools

• Cutting Machinery

3DX type tipped saw with low cutting resistance and high-speed cutting. We can handle a wide range of materials, from aluminum ...

• Machining / Machine Tools

• Cutting Machinery

■Quick press for aluminum sash for ease of use ・This model takes into account the effort and risk reduction when changing mold...

• Machining / Machine Tools

• Machine Presses