Sigma Industries Co., Ltd.

Comes with nitrogen purge mechanism. We will manufacture as many rooms as you request. Temperature setting: 50 to 350℃ (determi...

• Machining / Machine Tools

• Soldering & Desoldering Equipment

When the inspection pressure is high, a clamp structure using a preload pressure intensifier is used.

• Machining / Machine Tools

• Die Casting Machines

The cam structure moves the weight up and down and presses it against the workpiece a specified number of times.

• Test Equipment

• Load Testing Machines

If the leak test is negative, the water tank at the bottom of the device will rise. After being immersed in water, test air is ...

• Machining / Machine Tools

• Die Casting Machines

This is a device that measures the flow rate when a specified pressure is applied to the workpiece. It is also equipped with a ...

• Meters & Instruments

• Flowmeters

This is a tester unit that uses a torque meter.

• Testing Equipment

• Torque Checkers

This is a device for deburring aluminum die-cast products. Press the burr part of the workpiece against the rotating disk manua...

• Machining / Machine Tools

• Grinders

This is a durability test device that repeats intake and exhaust.

• Test Equipment

• Fatigue Testing

Equipped with a torque meter, screw in to the specified torque.

• FA Equipment

• Screw Driving Machines

Depending on the number of production, we can also propose a double structure.

• Test Equipment

• Leak Testers

A simple clamp unit consisting of an air cylinder and hand valve. We will design and manufacture custom-made items according to...

9 models listed

The workpiece is fixed in a vice, the hammer is swung up to a specified height, and a shock is applied to the workpiece in a ci...

• Test Equipment

• Impact Testers

Holes are drilled with high precision using two self feeders. Equipped with a cutting oil circulation system.

• Machining / Machine Tools

• Die Casting Machines

This is a device that performs a 5-unit torque durability test.

• Test Equipment

• Torque Testers

This is an automatic foam material assembly machine equipped with a collaborative robot. Machine cycle is 8 seconds. We will ma...

• Robots

• Collaborative Robots

We will design and manufacture the mechanism using toggle clamps according to your budget.

• Test Equipment

• Leak Testers

The left and right sides are separate mechanisms. Drive independently. This is an air-hydro system that uses a pre-pressure boo...

• Test Equipment

• Leak Testers

4 pieces of work can be set.

• Test Equipment

• Leak Testers

We use general commercial standard O-rings. The groove is designed to follow the ridgeline of the work. The cross section of th...

3 models listed

This is a submersion inspection machine that uses only factory air as the driving source. Does not use electricity.

This is a submersion inspection machine with electrical equipment. Perform a visual leak inspection.

This core is offset 2mm smaller than the inner wall of the workpiece using 3D data processing. In leak test equipment, the amou...

A specified amount of swinging water is applied to the workpiece in a closed room.

Pressure control for 0 to +5kPa is possible.