Sugimoto Ltd.

A long screw with high tensile strength. Metric screw M4,M5,M6,M8 x 300L is S45C H Metric screw M10 x 300 ~ SCM H All metric sc...

• Fastening Components

• Stud Bolts

For material lifting, positioning, etc. ■Material ・Body: SCM435 ・Ball: SUJ-2

• Fixtures

• Plungers

Although it has a hexagonal head, please use it for the same purpose as a square bolt. Material S45C heat treated product

• Fastening Components

• Structural Bolts

Used in combination with a T-slot nut to tighten cushion springs, etc. There are ``metric screws'' and ``inch screws.'' Dependi...

• Fastening Components

• Stud Bolts

It has a sturdy shape with a blunt tip (M20 or higher) and a ground finish on the bottom. Material: S55C

• Tools

• Clamps

A clamp that is easy to use and comes in a variety of sizes. Material: S55C

• Tools

• Clamps

This is the basics of clamping. The holes are oval so alignment is easy. Material: S45C

It is a long type of set screw. Material SCM435 Heat treated product

• Fastening Components

• Screw Piles

Vertical ram motion is used for horizontal or inclined movement, as well as for changing direction.

• Fixtures

• Linear Guides

This is a replacement nozzle exclusively for the nozzle stand, and is compatible with all nozzle stands via the nozzle holder. ...

Ideal for stud bolt joints, etc. Can withstand repeated tightening

• Fastening Components

• Hexagon Nuts

This washer is a heat-treated product and is ideal for press bolts and press nuts because it has little sagging or denting when...

• Fastening Components

• Metal Washers

The thread diameter is small compared to the machine groove width, and the tightening force is inferior to press bolts, but it ...

• Fixtures

• T Nuts

For preventing loosening of hexagon socket set screws and adjusting spring pressure. Material SCM435 HRC34~44

• Fastening Components

• Set Screws

The thickness is the same as the screw diameter, providing strong tightening force. Witscrews are available in two types: S45C ...

• Fastening Components

• Hexagon Nuts

Ideal for stud bolt joints, etc. Can withstand repeated tightening

• Fastening Components

• Hexagon Nuts

Used when the bolt and nut tightening surfaces cannot be parallel. Material: S45C heat treated product JIS B5213 equivalent *1...

• Fixtures

• Spherical Washers

Tightening can be done smoothly. Material S45C Heat treated product No serration

• Fastening Components

• Hexagon Nuts

The thickness is the same as the screw diameter, providing strong tightening force. Metric screw material SCM435 Heat treated p...

• Fastening Components

• Hexagon Nuts

This is a replacement nozzle exclusively for the nozzle stand, and is compatible with all nozzle stands via the nozzle holder. ...

A long screw with high tensile strength. Inch screws are SNB7 for both 300L and 1000L.

• Fastening Components

• Stud Bolts

It has a sturdy shape with a blunt tip (M20 or higher) and a ground finish on the bottom. Material: S55C

• Tools

• Clamps

Material: S45C heat treated product

• Fastening Components

• Metal Washers

■Features - Dowel pins from Φ6 to Φ20 can be easily pulled out. - Can be used by simply attaching a commercially available cap ...

For preventing loosening of hexagon socket set screws and adjusting spring pressure. Material SCM435 HRC34~44

• Fastening Components

• Set Screws

Used in combination with a T-slot nut to tighten cushion springs, etc. There are ``metric screws'' and ``inch screws.'' Materia...

• Fastening Components

• Stud Bolts

Material: SS400

Please use it to adjust the shaft length of stripper bolts. *Please order in units of 1 bag (100 pieces)

• Fastening Components

• Metal Washers

Tightening can be done smoothly. Material S45C Heat treated product No serration

• Fastening Components

• Hexagon Nuts