Yamada Machine Tool Co., Ltd.

■Piranha Clamp What is Piranha Cooling Line? Since it can be screwed into place, you can reliably supply coolant to the targete...

156 models listed

• Nozzles

• Air Blow Nozzles

■What is Burcut BC? Evolving deburring tools. BurCut BC is a deburring tool for cross holes that is attached to a machine with ...

10 models listed

• Machining / Machine Tools

• Deburring Tools

■What is ETP Eco Grip ER? ETP Eco Grip is a unit for converting an ER collet type holder to a hydro clamp type holder. Easy to ...

30 models listed

• Fixtures

• Collet Chucks

■Features ・It is possible to machine flats on workpieces of φ250 or less. -Higher rigidity than conventional holders. - Can st...

3 models listed

• Machining / Machine Tools

• Cutting Tools

■Features ・It is possible to machine flats on workpieces of φ50 or less. ・Although it is small in size, it is compatible with...

4 models listed

• Machining / Machine Tools

• Cutting Tools

■Features ・Surface machining is possible on workpieces of φ50 or less. ・This is a simple holder with only one wheel installed...

6 models listed

■What is a roller burnishing tool? Roller burnishing is a method that improves surface roughness by pressing a hard roller agai...

6 models listed

• Tools

• Special Tools

■What is ETP Hydrofix? ETP Hydrofix is ​​a hydraulic clamping system that has been highly praised by customers for over 17 year...

22 models listed

• Clamps & Fasteners

• Hydraulic Clamps

■What is Dai-ichi Kensho Seisakusho Trimos high-performance length measuring machine? This is a vertical/horizontal measuring m...

10 models listed

• Measuring Equipment

• Length Measuring Machines

■What is Ponta Mark I/Mark II? ・Engraving can be done safely without the need for a hammer. ・To use, just press it, no power ...

2 models listed

• Tools

• Engraving Services

■Features ・Can perform flattening on workpieces of φ200 or less. ・The number of wheels installed is 1, and the holder has a s...

4 models listed

■What is fiber laser marker? It can print on all metals and is ideal for in-line types. Can be used on all surface specificatio...

5 models listed

• Machining / Machine Tools

• Laser Markers

■Daiichi Hoken Seisakusho gauge products Yamada Machine Tool Co., Ltd. boasts the top market share in screw gauges and sells va...

10 models listed

• Meters & Instruments

• Screw Thread Gages

The BNN type diamond burnishing tool is a low-priced tool for small-lot processing that has a simplified burnishing tool mechan...

10 models listed

• Tools

• Special Tools

Tools that can be used on lathes and machining centers to process various shapes such as keyways, square holes, hexagonal holes...

• Machining / Machine Tools

• Rotary Tools

■Features ・It is possible to process cross stitches on workpieces of φ250 or less. -Higher rigidity than conventional holders....

3 models listed

• Machining / Machine Tools

• Cutting Tools

■Features ・It is possible to process cross stitches on workpieces of φ50 or less. ・Although it is small in size, it is compat...

3 models listed

• Machining / Machine Tools

• Cutting Tools

■What is GenSwiss T-Rock? Ti-Loc®SwissClamp: Ti-Loc Swiss Clamp Micro End Mill Extension Introducing the Ti-Loc® Swiss Clamp S...

10 models listed

• Fixtures

• Collets

■Features ・Both flat and cross stitches can be processed on workpieces of φ44 or smaller. ・Designed for machining by sandwich...

4 models listed

■Features ・Can machine flats on workpieces of φ12 or less. - The smallest holder in the cutting holder lineup. - Recommended w...

3 models listed

• Clamps & Fasteners

• Toolholders

■Features of XF510em P series ・No computer required ・3 types available for each marking area ・Ultra high-speed marking of 10...

3 models listed

• Machining / Machine Tools

• Marking Presses

■What is a hybrid laser marker? This is a model where the main body and controller are integrated. Can be printed on all metals...

2 models listed

• Machining / Machine Tools

• Laser Markers

■What is a roller burnishing tool? Roller burnishing is a method that improves surface roughness by pressing a hard roller agai...

3 models listed

• Tools

• Special Tools

By adopting a toggle mechanism, uniform quality is always obtained. A clear stamp can be engraved just by lightly pulling the l...

• Machining / Machine Tools

• Marking Presses

■What is ARC thread rolling head? The thread rolling head usually involves three rolls and enters from the end face of the mate...

• Tools

• Special Tools

The marking cell is a highly versatile unit that includes all the elements necessary for laser marking work in an all-in-one pa...

2 models listed

• Machining / Machine Tools

• Laser Markers

■What is MAS PZ Turn? This item is recommended for the following automatic lathe users. ・Labor shortage ・Differences in skill...

• Machining / Machine Tools

• Rotary Tools

■What is Masa Tool Microconic System? The Microconic system is a collet chuck system for the back spindle (sub-spindle) of auto...

• Clamps & Fasteners

• Chucks

■What is BENZ LinA4.0? A slotting tool for machining keyways, polygonal holes, splines, etc. with cutting machines such as lath...

• Machining / Machine Tools

• Multitasking Machines

■Features ・It is possible to process cross stitches on workpieces of φ12 or less. ・This is the smallest holder in the cutting...

2 models listed

• Machining / Machine Tools

• Cutting Tools