Kitano Seiki Co., Ltd.

■Features This device is an observation and inspection device that uses a scanning laser microscope to observe changes in the b...

• Observation Equipment

• Laser Scanning Microscoppes

■Features ・Small space, compact design ・Up to 5 evaporation cells can be installed ・Wide selection of base sizes from 1 to 3...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

■Applications ・Organic EL material development ・Polymer material development ・Phosphorescent material development ・Developm...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

This equipment is a Brainer type magnetron sputtering equipment that uses a DC magnetron sputtering source. This is an ultra-hi...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

■Features This equipment is a hybrid type evaporation equipment equipped with 4 magnetron sputter sources using PVD method, 2 E...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

■Summary ・Measurement and control (multi-pin) round electrode terminals are suitable as feed-throughs for measurement and cont...

• Terminals / Interfaces

• Connector Terminals

■Features ・ISO (KF) flange models range from NW-10KF to NW-50KF sizes. ・O-ring seal allows repeated connections ・Connection ...

• Sealing Devices

• Blank Flanges

■Features ・This is a 2-axis introduction machine that transmits rotational motion from the atmosphere side to samples and equi...

• Drive Mechanisms & Components

• Rotating Shafts

■Summary ・Current (unipolar) current terminals are suitable for heaters, lamps, etc. that use large currents. ・You can choose...

• Terminals / Interfaces

• Connector Terminals

■Summary ・Cables and connectors for current (single pole) can be used for large current applications such as heaters and lamps...

• Terminals / Interfaces

• Connector Terminals

■Applications ・Organic EL material development ・Polymer material development ・Phosphorescent material development ・Developm...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

Gas released from the inner walls of the vacuum chamber and from inside the chamber material poses a major obstacle to achievin...

• Controllers

• Vacuum Controllers

■Features ・Small space, compact design ・Up to 5 evaporation cells can be installed ・Wide selection of base sizes from 1 to 3...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

■Features ・Small space, compact design ・Up to 5 evaporation cells can be installed ・Wide selection of base sizes from 1 to 3...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

■Summary The 40C1 ion gun is a compact and simple ion gun for cleaning sample surfaces. The mounting flange is DN40CF (outer di...

• Machining / Machine Tools

• Sputtering Equipment

■Features This equipment is a Brainer-type magnetron sputtering ultra-high vacuum thin film production equipment using a DC mag...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

■Summary ・The coaxial SHV terminal is a high voltage coaxial type feedthrough with an impedance of 50Ω that is most widely use...

• Terminals / Interfaces

• Connector Terminals

■Applications ・Organic EL material development ・Polymer material development ・Phosphorescent material development ・Developm...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

■Summary The RS40B1 is a new, high power twin anode (Al/Mg) X-ray source developed for photoelectron spectroscopy. Z-shift is a...

• Machining / Machine Tools

• Sputtering Equipment

■Summary ・The coaxial BNC terminal is a 50Ω impedance coaxial type feedthrough that is most widely used for measurement and si...

• Terminals / Interfaces

• Connector Terminals

■Summary - Voltage (single pole) voltage terminals are suitable for applying high voltage to samples in vacuum, etc., and can a...

• Terminals / Interfaces

• Connector Terminals

■Features ・Usually a copper gasket (oxygen-free copper) is used to seal the flange. ・Vacuum seal is created by biting the kni...

• Fastening Components

• Gaskets

This product is a low-temperature cell (Organic Deposition Cell: KOD-Cell) that can operate stably at low temperatures for grow...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

Price (without tax)

$ 3,120.00

■Features ・This is an introduction device that transmits rotational motion from the atmosphere side to samples and equipment i...

• Drive Mechanisms & Components

• Rotating Shafts

■Summary TMC-13 is a film thickness monitor compatible with standard 6MHz crystal resonators. It can be operated from the LCD t...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

■Features ・Compact and easy-to-use vapor deposition source ・Easy maintenance ・Filament heating crucible configuration for el...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices

■Features ・ISO (LF) flanges are available from NW63LF to NW630LF sizes. - Made of stainless steel (SUS316L) and compatible wit...

• Fittings

• Flanges

■Summary ・The N-type high frequency terminal is a 50Ω high frequency coaxial type feedthrough with impedance up to 200MHz. ・S...

• Terminals / Interfaces

• Connector Terminals

■Deposition chamber/characteristics ・Ultra-high vacuum deposition ・Small space, compact design ・Up to 9 evaporation cells ca...

• Semiconductor Manufacturing

• Semiconductor Manufacturing Equipment Component & Part Machining

■Features This device is a high melting point metal evaporation device using electron beam (EB). This device uses a rotating/re...

• Machining / Machine Tools

• Vacuum Vapor Deposition Devices