Product
Small 2D code fixed scanner MCR-F180 seriesHandling Company
Ma Stoken SolutionItems marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Close sensor | Digital input | Digital output | Effective pixel number | Environmental resistance operating temperature | Environmental resistance operation humidity | Environmental resistance peripheral illuminance | Environmental resistance preservation humidity | Environmental resistance protection structure | Environmental resistance storage temperature | Environmental resistance vibration resistance | External dimensions | Light emission point torch light source | Lighting lighting lighting source | Minimal resolution | Power supply rated power supply voltage | Power supply rating current consumption | Read distance | Reading angle | Reading field range (at 100mm) | Removable part image element | Supported symbol 1D / 2D | interface | mass |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MCR-F180 |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % | DC power supply: Approximately 150ma when waiting for waiting | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 220g | |
MCR-F180A |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % | DC power supply: Approximately 150ma when waiting for waiting | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 220g | |
MCR-F180R |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % | DC power supply: Approximately 150ma when waiting for waiting | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 220g | |
MCR-F180AR |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % | DC power supply: Approximately 150ma when waiting for waiting | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 220g | |
MCR-F180P |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % PoE Power supply: Typea only * DC and PoE cannot be used simultaneously | DC Power Saying: Waiting: Approximately 150ma Reading Operation: Approximately 400 Mapoe Power Say: Electric Power Class 3 | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 235g | |
MCR-F180AP |
Available upon quote | Infrared laser 940nmClass1 | Photoba plastic instruction x 1 point input resistance: 2.2kΩ off voltage: 0 to 0.8V, on voltage: 10.8 to 28V | Photoba plastic insulation x2 points (F180/A/P/AP model), photocoupla insulation x1 points (R/AR model) Maximum rated DC30V50MA | 1280 (x) x 960 (Y) (about 1.2 million pixels) | 0 to 40 ° C | 35-85 % R.H. | 10000LX or less | 35-85 % R.H. | IP67 | -20 ~+60 ℃ | 10 to 55Hz amplitude 1.5mm (full width)/x, y, z 2 hours in each direction | 60 (H) x 45 (W) x 35 (d) mm (excluding protrusions) | Blue LED470nm | High -brightness white LED, high -brightness red LED625nm | MCR-F180: 0.125mmCR-F180A: 0.167mm | DC power supply: DC24V ± 10 % PoE Power supply: Typea only * DC and PoE cannot be used simultaneously | DC Power Saying: Waiting: Approximately 150ma Reading Operation: Approximately 400 Mapoe Power Say: Electric Power Class 3 | MCR-F180: 25-175mmCR-F180A: 85-320mm | Pitch (Pitch): ± 35 °/screw (SKEW): ± 35 °/tilt (TILT): 360 ° 250MW (24dbm) | 71 x 53mm | 1/3 inch CMOS Image Senshokuro | Code39, Code128/GS1-128 (EAN128), Codabar (NW7), ITF (interleaded 2OF5), UPC/EAN/Jan, GS1DATABAR (RSS), Code93, Datamatrix (ECC20), Compositecod E, QRcode/microqrcode, pdf417/micropdf, Azteccode | Ethernet (100BASE-TX, 10BASE-TE)/RS-232C (R/AR only) Cable length 2000mm (standard)/530mm (-L053)/70mm (-l007) Cable installation direction: Straight (-st model)/Light angle (-RA model) | Approximately 235g |
Click on the part number for more information about each product