DIN36×72 type high speed strain gauge panel meter VMM7 series
VALCOM CO.,LTD.
About This Product
1,000 times/sec MAX. High-speed sampling type, compact and highly functional. Intuitive judgment is possible with the LED display that changes color from green to red.
■Features
・Input range of strain gauge input (-4 to 4mV/V) and various pressure sensors/load cells can be connected.
・High-speed type with sampling speed of up to 1,000 times/second
・The model with analog output is a multi-type that allows arbitrary scaling of (0 to 1 V, 0 to 10 V, 1 to 5 V, 4 to 20 mA)
・Compact size 72 (W) x 36 (H) DIN size and space saving, and a large, easy-to-read monitor with a character height of approximately 16 mm.
・LED display changes color to green and red, judgment results can be determined by color
・Equipped with 5 comparison setting outputs and various functions as standard.Equipped with "Start Hold", "Digital Zero", "Peak Hold", and "Pattern Select" functions.
Numerous features
■Pattern selection function
What is the pattern select function? Up to 8 patterns of scaling data and comparator data can be stored, and any pattern to be used can be set. Pattern selection control includes terminal control and front key operation depending on condition data settings.
For terminal control, you can switch from P-1 to maximum P-8 by shorting the P.SEL1 to P/SEL3 terminals and the COM terminal or making them the same potential. In addition, in the case of front key control, the pattern can be switched by pressing the increment key for about 3 seconds.
■Start hold function
The start/hold function is a function that stops the display at any timing, and type A and type B can be set using condition data. The A type is in free run mode, and the displayed value and comparison judgment value are held by shorting the S/H terminal to the COM terminal or making them the same potential from the free run state. The B type is in one-shot mode, which outputs the display value and comparison judgment value once by shorting the S/H terminal to the COM terminal or making them at the same potential from the hold state.
■Peak hold function
The peak hold function is a function that holds either the maximum value (peak hold) / minimum value (valley hold) / maximum value - minimum value (peak valley hold) and outputs each value for that value. (These switches are set by condition data.)
-
Product
DIN36×72 type high speed strain gauge panel meter VMM7 series
-
Handling Company
VALCOM CO.,LTD.
-
Categories
1 Models of DIN36×72 type high speed strain gauge panel meter VMM7 series
| Product Image | Part Number | Price (excluding tax) | Accessories | Accuracy | Comparison condition Display value > Upper upper limit judgment value > Upper limit judgment value | Comparison operation | Compatible sensor | Control method | Decimal point | Display | Display range | External control | External dimensions | Highest resolution | Hysteresis | Insulation resistance | Judgment value setting range | Mass | Operating humidity range | Operating temperature range | Overrange warning | Polarity display | Power consumption | Power supply | Sampling rate | Sensor power supply | Span adjustment range | Storage humidity range | Storage temperature range | Withstand voltage | Zero adjustment range | Zero display |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VMM7 DIN36×72 type high speed strain gauge panel meter |
Available upon quote | 1 copy of instruction manual | ± (0.1% of F.S.+2digit) (23℃±5℃ 35~85%) | Judgment result: HH, HI | Depends on sampling rate | 350Ω | Microcomputer calculation method | Can be set to any position | 7 segment LED display (character height: approx. 16mm) | -9,999~9,999 | P.SEL1~3,HOLD,PH,DZ (depending on output unit) | 72mm (W) ×36mm (H) ×118mm (D) | Sensor power supply 5V: 0.5μV/digit, sensor power supply 10V: 1μV/digit | Can be set in the range of 1 to 999 digits for each judgment value | DC500V 100MΩ or more | -9,999~9,999 | Approximately 160g | 35~85%RH (no condensation) | 0~50℃ | OVER or -OVER for input signals exceeding the display range | Automatically displayed when the calculation result is negative | 8VA max. (AC power supply unit), 7W max. (DC power supply unit) | AC power supply: AC100~240V±10% DC power supply: DC12V~48V±10% | Approximately 1,000 times/second | 5V±5% 30mA, 10V±5% 30mA | 1~3mV/V | 60%RH or less | -10~70℃ | AC power supply: 1,500V AC for 1 minute between power supply terminal and input terminal/COM/comparison output/BCD/RS communication terminal, DC power supply: 500V DC for 1 minute between power supply terminal and input terminal/COM/comparison output/BCD/RS communication terminal | -±1mV/V | Leading zero suppress |
Customers who viewed this product also viewed
Other products of VALCOM CO.,LTD.
View more products of VALCOM CO.,LTD.
