DIN36×72 type high speed digital panel meter VMM7 series
VALCOM CO.,LTD.
About This Product
Compact, multi-input compatible, high-speed type with sampling up to 1,000 times/second. Intuitive judgment is possible with the LED display that changes color from green to red.
■Features
・Multi-type process input (1~5V, ±5V, 4~20mA, ±20mA)
・High-speed type with sampling speed of up to 1,000 times/second
・The model with analog output is a multi-type that allows arbitrary scaling of (0 to 1 V, 0 to 10 V, 1 to 5 V, 4 to 20 mA)
・CE compatible (*Only compatible with power supply voltage and DC drive)
・Compact size 72 (W) x 36 (H) DIN size and space saving, and a large, easy-to-read monitor with a character height of approximately 16 mm.
・LED display changes color to green and red Judgment results can be distinguished by color
・Equipped with 5 comparison setting outputs and various functions as standard: "Start hold", "Digital zero", "Peak hold", "Pattern select"
Numerous features
■Pattern selection function
What is the pattern select function? Up to 8 patterns of scaling data and comparator data can be stored, and any pattern to be used can be set. Pattern selection control includes terminal control and front key operation depending on condition data settings.
For terminal control, you can switch from P-1 to maximum P-8 by shorting the P.SEL1 to P/SEL3 terminals and the COM terminal or making them the same potential. In addition, in the case of front key control, the pattern can be switched by pressing the increment key for about 3 seconds.
■Start hold function
The start/hold function is a function that stops the display at any timing, and type A and type B can be set using condition data. The A type is in free run mode, and the displayed value and comparison judgment value are held by shorting the S/H terminal to the COM terminal or making them the same potential from the free run state. The B type is in one-shot mode, which outputs the display value and comparison judgment value once by shorting the S/H terminal to the COM terminal or making them at the same potential from the hold state.
■Peak hold function
The peak hold function is a function that holds either the maximum value (peak hold) / minimum value (valley hold) / maximum value - minimum value (peak valley hold) and outputs each value for that value. (These switches are set by condition data.)
-
Product
DIN36×72 type high speed digital panel meter VMM7 series
-
Handling Company
VALCOM CO.,LTD.
-
Categories
1 Models of DIN36×72 type high speed digital panel meter VMM7 series
| Product Image | Part Number | Price (excluding tax) | Accessories | Accuracy | Comparison condition Display value > Upper upper limit judgment value > Upper limit judgment value | Comparison operation | Control method | Decimal point | Display | Display range | External control | External dimensions | Hysteresis | Input impedance | Insulation resistance | Judgment value setting range | Mass | Maximum allowable input | Measuring range | Operating humidity range | Operating temperature range | Overrange warning | Polarity display | Power consumption | Power supply | Process input display | Sampling rate | Sensor power supply | Storage humidity range | Storage temperature range | Withstand voltage | Zero display |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VMM7 DIN36×72 type high speed digital panel meter |
Available upon quote | 1 copy of instruction manual | Range 1V, Range 2V:± (0.03% of rdg +2digit) (23℃±5℃ 35~85%) | Judgment result: HH, HI | Depends on sampling rate | Microcomputer calculation method | Can be set to any position | 7 segment LED display (character height: approx. 16mm) | -9,999~9,999 | P.SEL1~3,HOLD,PH,DZ (depending on output unit) | 72mm (W) ×36mm (H) ×118mm (D) | Can be set in the range of 1 to 999 digits for each judgment value | Range 1V, Range 2V: Approx. 1MΩ, Range 2A, Range 3A: Approx. 10Ω | DC500V 100MΩ or more | -9,999~9,999 | Approximately 160g | Range 1V, Range 2V: ±100V, Range 2A, Range 3A: ±50mA | Range 1V: 1~5V, Range 2V: ±5V, Range 2A: 4~20mA, Range 3A: ±20mA | 35~85%RH (no condensation) | 0~50℃ | OVER or -OVER for input signals exceeding the display range | Automatically displayed when the calculation result is negative | 8VA max. (AC power supply unit), 7W max. (DC power supply unit) | AC power supply: AC100~240V±10% DC power supply: DC12V~48V±10% | Offset: ±9,999, Scaling: ±9,999 | Approximately 1,000 times/second | DC24V±10% 25mA or DC12V±10% 25mA | 60%RH or less | -10~70℃ | AC power supply: 1500V AC for 1 minute between power supply terminal and input terminal/COM/comparison output/BCD/RS communication terminal, DC power supply: 500V DC for 1 minute between power supply terminal and input terminal/COM/comparison output/BCD/RS communication terminal | Leading zero suppress |
Customers who viewed this product also viewed
Other products of VALCOM CO.,LTD.
View more products of VALCOM CO.,LTD.
