Measurement area sensor area setting type UBG-05LN-UBG-05LN

Measurement area sensor area setting type UBG-05LN
Hokuyo Electric

About This Product

It is a obstacle detection sensor that detects an object in the range of 5m width and 4m in a free area.
AGV (unmanned transportation vehicle) and robot can be used for detection for obstacles and is a laser light source. * Orders ended in March 2024

It is a two -dimensional scanning light range that measures the distance to the detection while scanning with light, and is ideal for avoiding obstacles and route planning of service robots that travel at high speed.
・ Power supply voltage DC24V ・ current consumption current consumption 150ma or less
-The distance range is 0.1 to 5m in vertical direction x 4m width and 180 ° angle.

You can display and confirm the status of the detection area in real time, and you can see the status of the detected area in real time on the PC (RS-232C) screen.

Up to 31 patterns of detection areas can be switched, and it is possible to switch the detection area set by PC operation in advance by bit input from the outside.
The detection area can be created freely using a personal computer, and the detection distance of three -stage output can be set for each detection area.

Model
There are 1 models for this product.

Product
Measurement area sensor area setting type UBG-05LN

Handling Company
Hokuyo Electric

*Please note that we may not be able to accommodate sample requests.

1 Models of Measurement area sensor area setting type UBG-05LN

Product Image	Part Number	Price (excluding tax)	Case Material Back	Case Material Front Part	Case material back	Case material front part	Current Consumption Current	Current consumption current	Detected Object	Detected object	INPUT RESPONSE TIME	Impact Resistance	Impact resistance	Indicator light	Input response time	Insulation Resistance	Insulation resistance	Light Source	Noise	Output Response Time	Output response time	Power-Supply Voltage	Power-supply voltage	Protective Structure	Protective structure	Range of Detection	START-UP TIME	Start-up time	USed Peripheral Temperature Humidity	Used peripheral temperature humidity	Vibration Resistance	Vibration resistance	conNection	connection	input	light source	mass	noise	output	range of detection
	UBG-05LN	Available upon quote	Abs Resin	Polycarbonate	ABS resin	Polycarbonate	150ma or less	150ma or less	WHITE CENT PAPER 125mm x 125mm	White cent paper 125mm x 125mm	Entering Cycle: 1 Scanning Time	196m/S2X, Y, Z Direction 10 Times Each	196m/S2X, Y, Z direction 10 times each	Power Suppry Indicator (Green): Flashing output output 1 Indicator (Orange) Due to Startup and Failure Recognition (Orange): Lighting Output 2 Indicat 2 OR (Orange): Lighting Output 3 Indicator (Orange) in The Area (Orange): Lights in the Area.	Entering cycle: 1 scanning time	10mΩDC500V MEGGER	10mΩDC500V megger	Semiconductor Laser λ = 785nm	25db or less	210ms or less	210ms or less	DC24V	DC24V	IP64	IP64	AREA WITH A Vertical Direction of 0.1 to 5m Width 4m, But within 180 ° Scan Angle	Operation within 10 Seconds of Power Launch	Operation within 10 seconds of power launch	-10 ° C to+50 ° C 85%RH or Less. However, Do Not Freeze or Condentation.	-10 ° C to+50 ° C 85%RH or less. However, do not freeze or condensation.	10-55Hz Double Width 1.5mmx, Y, Z Direction 2 Hours Each	10-55Hz double width 1.5mmx, Y, Z direction 2 hours each	Cable Line Drawer Type 1m	Cable line drawer type 1m	PhotocaPla Input Voltage Range: DC18-30V Detection Area Switching Input Input 1, 2, 3, 4, 5 Input of the AREA NUMBER 1, 2, 3, 4, 5 Emitting Light.	Semiconductor laser λ = 785nm	185g	25db or less	Photocapula / NPEN Open Collector Output 1: Output Off Output by Detection in The Area 2: Output Off Off Off Output in The Area 4: NORMA 4: NORMA L time output on	Area with a vertical direction of 0.1 to 5m width 4m, but within 180 ° scan angle