LAN interface Ethernet gateway
NKE Corporation
About This Product
This product is a device (gateway) for connecting UNILINE and Ethernet.
UNILINE input/output devices can be used by relaying Ethernet. It has UNILINE send function and Ethernet communication function. UNG-LN2 has 128 input points and 128 output points that are automatically connected 1:1 between the products. UNG-LN2 can be connected to a computer, etc. and can control up to 512 input/output points. On the UNILINE side, disconnection can be detected even if branch wiring is used.
-
Product
LAN interface Ethernet gateway
-
Handling Company
NKE Corporation
-
Categories
2 Models of LAN interface Ethernet gateway
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature | Antistatic | Atmosphere | Ethernet interface | Ethernet side communication method | Ethernet side data transfer rate | Ethernet standard | Ground | Installation method | Insulation resistance | Noise resistance | Number of ports on Ethernet side | Operating humidity | Power consumption | Power supply voltage | Shockproof | Storage temperature | UNLINE port | UNLINE side I/O points | UNLINE side refresh cycle time | UNLINE side relay contact switching capacity | UNLINE side terminal block current passing capacity | UNLINE side transmission delay time | UNLINE side transmission distance | UNLINE side transmission method | UNLINE side transmission procedure | Vibration resistance | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
UNG-LN2 |
Available upon quote | 0℃~＋55℃ | Contact/4kV (IEC1,000-4-2 Level2), Air/8kV (IEC1,000-4-2 Level3) | No corrosive or flammable gas | RJ45 connector (10BASE-T, 100BASE-TX) | Full/Half Duplex (automatic switching) | 10Mbps/100Mbps automatic recognition | Ethernet::IEEE 802.3/IEEE 802.3u compliant | Class D grounding (formerly Class 3 grounding) | 35mm DIN rail | 20MΩ or more between external terminal and outer box | 1,200Vp-p, pulse width 1μs | 1 port | 35%~85%RH (no condensation) | 8Wmax. | 24V+15%-10% | 100m/s2 (compliant with JIS C 60068-2-27) | -20℃~＋70℃ | 1 port (64 addresses Max.) | SDD-LN2 (1:1 automatic link mode type): 256 points fixed (input 128 points/output 128 points), SDD-LN2 (1:N connection mode type): Maximum 512 points (input 512 points set at factory) | Maximum 144.1ms (varies depending on transmission speed and number of transmission points settings) | 2A-DC30V/0.5A-DC110V/0.5A-AC125V | 3Amax. (between 24V and 24V on the terminal block or between OV and OV) | Maximum 576.4ms (varies depending on transmission speed and number of transmission points settings, UNLUINE part only) | Total length 200~2,000m (depending on speed setting) | Bidirectional time division multiplexing transmission system | UNLINE protocol | 10~55Hz double amplitude 0.5mm (JIS C 60068-2-6 compliant) | Between external terminal and outer box: AC1,000V for 1 minute |
|
|
UNG-LN2N |
Available upon quote | 0℃~＋55℃ | Contact/4kV (IEC1,000-4-2 Level2), Air/8kV (IEC1,000-4-2 Level3) | No corrosive or flammable gas | RJ45 connector (10BASE-T, 100BASE-TX) | Full/Half Duplex (automatic switching) | 10Mbps/100Mbps automatic recognition | Ethernet::IEEE 802.3/IEEE 802.3u compliant | Class D grounding (formerly Class 3 grounding) | 35mm DIN rail | 20MΩ or more between external terminal and outer box | 1,200Vp-p, pulse width 1μs | 1 port | 35%~85%RH (no condensation) | 8Wmax. | 24V+15%-10% | 100m/s2 (compliant with JIS C 60068-2-27) | -20℃~＋70℃ | 1 port (64 addresses Max.) | SDD-LN2 (1:1 automatic link mode type): 256 points fixed (input 128 points/output 128 points), SDD-LN2 (1:N connection mode type): Maximum 512 points (input 512 points set at factory) | Maximum 144.1ms (varies depending on transmission speed and number of transmission points settings) | 2A-DC30V/0.5A-DC110V/0.5A-AC125V | 3Amax. (between 24V and 24V on the terminal block or between OV and OV) | Maximum 576.4ms (varies depending on transmission speed and number of transmission points settings, UNLUINE part only) | Total length 200~2,000m (depending on speed setting) | Bidirectional time division multiplexing transmission system | UNLINE protocol | 10~55Hz double amplitude 0.5mm (JIS C 60068-2-6 compliant) | Between external terminal and outer box: AC1,000V for 1 minute |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of NKE Corporation
View more products of NKE Corporation
About Company Handling This Product
- Japan