Interface for PLC
NKE Corporation
About This Product
■MQ-HUW
This is an interface that can be used with Mitsubishi Electric Corporation's programmable controller MELSEC-Q series. Can be used for CPU units operating in Q mode. (Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q12PHCPU, Q25HCPU, Q25PHCPU, Q00JCPU, Q00CPU, Q01CPU)
There is no limit to the number of modules that can be installed within the range of the number of input/output points of the CPU unit, and they can be installed in any slot position on the basic base or expansion base. (However, depending on the combination with other installed units and the number of installed units, insufficient power capacity may occur, so be sure to take the power capacity into consideration when installing.) Use Uniline's wide variety of input/output devices. It is also possible to branch the terminal.
■OMCJ1-HUW
This is a uniline interface that can be used with OMRON Corporation's PLC. The PLC that can be used is CJ Leeds. You can use Uniline's wide variety of input/output devices. It is treated as a high-performance I/O, and one slot can control 128 input/output points or 256 input/output points. Input and output can be monitored using the monitor unit RM-120 (sold separately).
■F3SVH64A
Uniline interface compatible with Yokogawa Electric PLC FA-M3. (F3SVH64/-C/-S/-M/-Z12/-Z58 upward compatible version)
You can select 64 points, 128 points, or 256 points of input/output in one slot. In the 64-point mode, no special program is required for serial transmission, and the operation mode can be selected using the mode switch. The total transmission distance can be selected from 200m, 500m, and 1km. Input and output can be monitored using a monitor unit (sold separately). Disconnection can be detected even if branch wiring is used.
-
Product
Interface for PLC
-
Handling Company
NKE Corporation
-
Categories
3 Models of Interface for PLC
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature | Installation location | Mass | Monitor terminal | Noise resistance | Number of I/O points | Number of connected terminals | Operating humidity | Refresh cycle time (128 points) | Refresh cycle time (256 points) | Refresh cycle time (64 points) | Storage humidity | Storage temperature | Synchronization method | Transmission delay time (128 points) | Transmission delay time (256 points) | Transmission delay time (64 points) | Transmission distance | Transmission method | Transmission procedure | Uniline port | Usage atmosphere | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MQ-HUW |
Available upon quote | 0℃~＋55℃ | Inside the control panel | - | Monitor unit RM-120 enables monitoring of ON/OFF status and abnormal ID, and forced ON/OFF. | - | 128 points or 256 points (input and output can be selected for each 16 points) | 20 units | 5%~95%RH (no condensation) | 200m approx. 5.1ms, 500m approx. 10.1ms, 1km approx. 20.0ms | 200m approx. 9.6ms, 500m approx. 18.9ms, 1km approx. 37.5ms | - | 5%~95%RH (no condensation) | -25℃~＋75℃ | Bit synchronization method | 200m approx. 5.9~11.0ms, 500m approx. 11.4~21.5ms, 1km approx. 22.4~42.4ms | 200m approx. 10.4~20.0ms, 500m approx. 20.2~39.1ms, 1km approx. 39.9~77.4ms | - | Select total length: 200m, 500m, 1km | Bidirectional time division multiplexing transmission system | Uniline protocol | 1 port, removable terminal block | Free of corrosive gases | - |
|
|
OMCJ1-HUW |
Available upon quote | 0℃~＋55℃ | - | 100g | ON/OFF status can be monitored using the separately sold monitor unit RM-120 | 1,500Vp-p (pulse width 1μs, 100ns) | 128 points (input/output combination 128/0.64/64.0/128), 256 points (input/output combination 256/0.128/128.0/256,192/64) | 20 units | 35%~85%RH (no condensation) | 200m approx. 5.1ms, 500m approx. 10.1ms, 1km approx. 20ms | 200m approx. 9.6ms, 500m approx. 18.9ms, 1km approx. 37.5ms | - | - | -20℃~＋70℃ | Bit synchronization method | 200m approx. 11.0ms, 500m approx. 21.5ms, 1km approx. 42.4ms | 200m approx. 20.0ms, 500m approx. 39.1ms, 1km approx. 77.4ms | - | Basic/C specification 200m, S/M specification 500m, Z12/Z58 specification 1km | Bidirectional time division multiplexing transmission system | Uniline protocol | 1 port, removable terminal block | No corrosive or flammable gas | 1,000V (Uniline side external terminal and PLC side) |
|
|
F3SVH64A |
Available upon quote | 0℃~＋50℃ | - | 140g | Monitor unit RM-120 (sold separately) enables monitoring of ON/OFF status, forced ON/OFF, and error ID monitoring. | - | Select 64 points, 128 points, or 256 points with the dip switch, and select the operation mode (input/output assignment) with the rotary switch. | - | 35%~85%RH (no condensation) | Without monitor connection: 200m 5.8ms, 500m 10.9ms, 1km 20.6ms/With monitor connection: 200m 6.5ms, 500m 11.5ms, 1km 21.0ms | Without monitor connection: 200m 11.0ms, 500m 20.5ms, 1km 41.0ms/With monitor connection: 200m 11.5ms, 500m 21.0ms, 1km 42.0ms | Without monitor connection: 200m 3.3ms, 500m 6.2ms, 1km 11.7ms/With monitor connection: 200m 4.0ms, 500m 6.8ms, 1km 12.0ms | - | -20℃~＋70℃ | - | Without monitor connection: 200m 11.6ms, 500m 21.8ms, 1km 41.2ms/With monitor connection: 200m 13.0ms, 500m 23.0ms, 1km 42.0ms | Without monitor connection: 200m 22.0ms, 500m 41.0ms, 1km 82.0ms/With monitor connection: 200m 23.0ms, 500m 42.0ms, 1km 84.0ms | Without monitor connection: 200m 6.6ms, 500m 12.4ms, 1km 23.4ms/With monitor connection: 200m 8.0ms, 500m 13.6ms, 1km 24.0ms | Select total length: 200m, 500m, 1km | Synchronization/multiplexing method | Uniline protocol | 1 port (20 addresses Max.) | No corrosive or flammable gas | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of NKE Corporation
View more products of NKE Corporation
About Company Handling This Product
- Japan