Torque sensor with built-in amplifier (converter) TPS-A
KYOWA ELECTRONIC INSTRUMENTS CO., LTD
About This Product
This is a small, lightweight, non-contact transmission torque converter with a built-in amplifier. Maintenance work can be reduced by contactless transmission.
■Features
・Voltage output ±5V with built-in amplifier
・With rotation output function (4 pulses/rotation)
- Standard compatible with friction couplings without a keyway (excluding TPS-A-5KNM), eliminating measurement errors caused by key backlash
■Notes
CE-compliant products can also be manufactured for TPS-A-01 to 2NM.
*Other model numbers are available.
-
Product
Torque sensor with built-in amplifier (converter) TPS-A
-
Handling Company
KYOWA ELECTRONIC INSTRUMENTS CO., LTD
-
Categories
10 Models of Torque sensor with built-in amplifier (converter) TPS-A
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable axial load | Allowable bending moment | Allowable overload | Allowable temperature range | Amplifier cutoff frequency | Current consumption | Hysteresis | Mass | Maximum rotation speed | Moment of inertia | Nonlinearity | Power supply | Protection class | Rated capacity | Rated output | Rotation output | S/N ratio | Sold separately | Temperature compensation range | Temperature effect at zero point | Temperature effect on output |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TPS-A-01NM for ±0.1N・m |
Available upon quote | 300N (when not rotating) | 1.0N・m (for a single sensor) | 200% | -10~70℃ (no condensation) | 1.5kHz (amplitude ratio at cutoff point -3±1dB) |
0.4A or less When supplying DC 12V |
Within ±0.1%RO | Approximately 150g | 15,000rpm | 1.5×10^-6kg・m2 | Within ±0.1%RO | DC 12V ±0.5V | IP40 (JIS C 0920) | ±0.1N・m | 5V±4% (Load resistance 2kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 50dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.1%/℃ |
|
|
TPS-A-05NM for ±0.5N・m |
Available upon quote | 300N (when not rotating) | 1.0N・m (for a single sensor) | 200% | -10~70℃ (no condensation) | 1.5kHz (amplitude ratio at cutoff point -3±1dB) |
0.4A or less When supplying DC 12V |
Within ±0.1%RO | Approximately 150g | 15,000rpm | 1.5×10^-6kg・m2 | Within ±0.1%RO | DC 12V ±0.5V | IP40 (JIS C 0920) | ±0.5N・m | 5V±4% (Load resistance 2kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 50dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.1%/℃ |
|
|
TPS-A-1NM ±1N・m |
Available upon quote | 300N (when not rotating) | 1.2N・m (for a single sensor) | 200% | -10~70℃ (no condensation) | 1.5kHz (amplitude ratio at cutoff point -3±1dB) |
0.4A or less When supplying DC 12V |
Within ±0.1%RO | Approximately 150g | 15,000rpm | 1.5×10^-6kg・m2 | Within ±0.1%RO | DC 12V ±0.5V | IP40 (JIS C 0920) | ±1N・m | 5V±4% (Load resistance 2kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 50dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.1%/℃ |
|
|
TPS-A-2NM ±2N・m |
Available upon quote | 300N (when not rotating) | 1.2N・m (for a single sensor) | 200% | -10~70℃ (no condensation) | 1.5kHz (amplitude ratio at cutoff point -3±1dB) |
0.4A or less When supplying DC 12V |
Within ±0.1%RO | Approximately 150g | 15,000rpm | 1.5×10^-6kg・m2 | Within ±0.1%RO | DC 12V ±0.5V | IP40 (JIS C 0920) | ±2N・m | 5V±4% (Load resistance 2kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 50dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.1%/℃ |
|
|
TPS-A-5NM for ±5N・m |
Available upon quote | 300N (when not rotating) | 1.5N・m (for a single sensor) | 150% | -10~70℃ (no condensation) | 200kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 1.5kg | 5,000rpm | 2.5×10^-4kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±5N・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.1%/℃ |
|
|
TPS-A-10NM ±10N・m |
Available upon quote | 300N (when not rotating) | 3N・m (for a single sensor) | 150% | -10~70℃ (no condensation) | 200kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 1.8kg | 5,000rpm | 2.6×10^-4kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±10N・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.05%/℃ |
|
|
TPS-A-50NM ±50N・m |
Available upon quote | 300N (when not rotating) | 15N・m (for a single sensor) | 120% | -10~70℃ (no condensation) | 200kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 1.8kg | 5,000rpm | 2.6×10^-4kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±50N・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFC-025SA2-T011-K-8B-□B No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.05%/℃ |
|
TPS-A-100NM ±100N・m |
Available upon quote | 600N (when not rotating) | 15N・m (for a single sensor) | 150% | -10~70℃ (no condensation) | 200kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 1.8kg | 5,000rpm | 2.7×10^-4kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±100N・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFF-080SS-K-19B-□B○-100N No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.05%/℃ |
|
TPS-A-500NM ±500N・m |
Available upon quote | 800N (when not rotating) | 150N・m (for a single sensor) | 150% | -10~70℃ (no condensation) | 500kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 9kg | 5,000rpm | 2.3×10^⁻³kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±500N・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFF-140SS-K-45K-□K○-800N No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) O |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.05%/℃ |
|
TPS-A-1KNM ±1kN・m |
Available upon quote | 800N (when not rotating) | 150N・m (for a single sensor) | 150% | -10~70℃ (no condensation) | 500kHz (amplitude ratio at cutoff point -3±2dB) |
0.5A or less When supplying DC 12V |
Within ±0.3%RO | Approximately 10kg | 4,000rpm | 2.6×10^⁻³kg・m2 | Within ±0.3%RO | DC 10~16V | IP40 (JIS C 0920) | ±1kN・m | 5V±4% (Load resistance 5kΩ or more) | 4 pulses/rotation (Rotation direction cannot be detected due to open collector output) | 45dB or more (when not rotating) |
Coupling: SFH-190S-T010-K-45K-□K○ No keyway □ is the mating hole diameter, ○ is the shaft machining tolerance (blank: h7, K: k6, M: m6, J: j6, S: 35+0.010~0) |
-10~60℃ (no condensation) | Within ±0.03%RO/℃ | Within ±0.05%/℃ |
Click on the part number for more information about each product
Customers who viewed this product also viewed
![ST Torque Meter [Measure tightening torque value in 1Nm units]-Japan Pralad Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3000976202309046.png)
Other products of KYOWA ELECTRONIC INSTRUMENTS CO., LTD
View more products of KYOWA ELECTRONIC INSTRUMENTS CO., LTD
