This product is registered by Testo SE & Co. KGaA.
About This Product
Testo 410-2 is a pocket-type wind speedometer that can also measure wind speed, temperature, and humidity, so you can not only measure the spots at the ventilation port (supply and exhaust port), check the air condition, but also use it outdoors. This wind speedometer displays parameters of parameters such as dew point temperature, wet bulb temperature, perceived temperature, and viewfort wind class by switching with a button.
The pocket size Testo 410-2 vane type wind speedometer can be measured when the wind speed is small in the range of 0.4 to 20 m/s in the range of 30 mm in diameter. Ideal for ventilation and outdoors.
This wind speedometer has a humidity sensor with excellent long-term stability of the test and an NTC temperature sensor with a measurement range of -10 to+50 ° C, and can be used to check the air condition. Therefore, you can use these sensors to measure gas temperature and humidity with high reliability. With Testo 410-2, other parameters such as dew points, wet bulb temperature, viewfort wind class, and perceived temperature (Windchill) can be displayed only by button switching.
Testo 410-2 comes with a protective cap and a wrist strap to prevent fall prevention. The functions are as follows.
1 point average function: Average wind speed, such as a savings and exhaust, is displayed
Hold function: Fixed the latest value of wind speed, gas temperature, and humidity and used for comparing data
Maximum value / minimum value function: Maintain the maximum and minimum measured values after turning on or reset or reset, and display it by button operation
Backlight display: You can read the measurement results even in dark environments
Unit selection: Wind speed: M/S, KM/H, MPH, KTS, Viewfort class,
Gap temperature: ℃, perceived temperature,
Humidity: Relative humidity, wet bulb temperature, dew point temperature
-
-
Product
Vane type wind speed meter Testo 410-2
Share this product