Commercial RO unit SP series
Youpi Co., Ltd.
About This Product
Commercial RO unit SP series that supports external device connection and enables mold production.
■Features
・94-96% of substances dissolved in raw water are separated and removed using R.O. (reverse osmosis) water purification method.
- Instruments are standard equipment, so system operating status can be checked at a glance.
- Up to 3 systems of water storage tank water level control signals and stop signals can be input.
・3 basic types depending on the amount of water used. (9t・18t・35t/Nissan)
・Energy-saving design that uses commercial R.O. membrane with ultra-low pressure specifications.
■Main functions
・Pressure pump stop function when supply water pressure drops
・One system of stop signal can be input
・Auto flushing function (30 seconds at startup/every 2 hours during continuous operation)
・Start/stop water purifier using liquid level sensor (sold separately)
・Glycerin pressure gauge x 3
・Flowmeter x 2
・Wrench for removing pre-filter housing
-
Product
Commercial RO unit SP series
-
Handling Company
Youpi Co., Ltd.
-
Categories
3 Models of Commercial RO unit SP series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Capacity Average ion removal rate | Capacity Displacement | Capacity Operating pressure range | Capacity Permeated water production amount | Capacity System recovery rate | Connection Permeated water supply side | Connection Raw water supply side | Connection drainage side | Control method | Dimensions (mm) | Dry weight | Filter R.O. Membrane | Filter pre-filter | Installation environment | Pressure capacity Operating pressure | Pressure resistance capacity Supply water pressure resistance | Rated power | Raw water condition pH | Raw water conditions Raw water supply amount | Raw water conditions Supply dynamic pressure range | Raw water conditions Supply water temperature | Raw water conditions Water quality | Water purification method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SP-9T |
Available upon quote | 94~96% | More than the same amount as permeated water (system recovery rate less than 50%) | 0.5~0.8MPa |
375L/hour at operating pressure 0.7MPa and water temperature 25℃ 187L/hour at operating pressure 0.7MPa and water temperature 5℃ 270L/hour Recommended production amount (constant operation regardless of water temperature) |
30~50% | Rc3/4 | Rc3/4 | Rc3/4 |
2-point liquid level sensor (Liquid level sensor and water storage tank sold separately) |
Height 1,500 x Width 700 x Depth 600 | 105kg | 4040XLE×1 |
20"BB 5μm sediment filter 20"BB carbon filter |
Indoors (Ambient temperature: 2~35℃ or less) *Cannot be used in frozen environments. |
1MPa | 0.4MPa | 100V 50/60Hz 200W | 5.8~8.6 | 1,500L/hour (25L/min) |
0.2~0.4MPa *If the pressure exceeds 0.4MPa, a pressure reducing valve is required. |
5℃~30℃ |
Tap water (however, the following conditions must be met) Hardness 100ppm or less, ionized silica 25ppm or less *If the raw water is groundwater, additional pre-treatment may be required. |
Reverse osmosis membrane (R.O.) water purification method |
|
|
SP-18T |
Available upon quote | 94~96% | Same amount as permeate water (when system recovery rate is 50%) | 0.5~0.8MPa |
750L/hour at operating pressure 0.7MPa and water temperature 25℃ 375L/hour at operating pressure 0.7MPa and water temperature 5℃ 549L/hour Recommended production amount (constant operation regardless of water temperature) |
50~65% | Rc3/4 | Rc3/4 | Rc3/4 |
2-point liquid level sensor (Liquid level sensor and water storage tank sold separately) |
Height 1,500 x Width 700 x Depth 600 | 125kg | 4040XLE×2 |
20"BB 5μm sediment filter 20"BB carbon filter |
Indoors (Ambient temperature: 2~35℃ or less) *Cannot be used in frozen environments. |
1MPa | 0.4MPa | 100V 50/60Hz 200W | 5.8~8.6 | 1,800L/hour (30L/min) |
0.2~0.4MPa *If the pressure exceeds 0.4MPa, a pressure reducing valve is required. |
5℃~30℃ |
Tap water (however, the following conditions must be met) Hardness 100ppm or less, ionized silica 25ppm or less *If the raw water is groundwater, additional pre-treatment may be required. |
Reverse osmosis membrane (R.O.) water purification method |
|
|
SP-35T |
Available upon quote | 94~96% | Same amount as permeate water (when system recovery rate is 50%) | 0.4~0.7MPa |
1,460L/hour at operating pressure 0.7MPa and water temperature 25℃ 730L/hour at operating pressure 0.7MPa and water temperature 5℃ 1,080L/hour Recommended production amount (constant operation regardless of water temperature) |
50~65% | Rc3/4 | Rc3/4 | Rc3/4 |
2-point liquid level sensor (Liquid level sensor and water storage tank sold separately) |
Height 1,500 x Width 700 x Depth 700 | 140kg | 4040XLE×4 pieces |
20"BB 5μm sediment filter 20"BB carbon filter |
Indoors (Ambient temperature: 2~35℃ or less) *Cannot be used in frozen environments. |
1MPa | 0.4MPa | 100V 50/60Hz 200W | 5.8~8.6 | 2,700L/hour (45L/min) |
0.2~0.4MPa *If the pressure exceeds 0.4MPa, a pressure reducing valve is required. |
5℃~30℃ |
Tap water (however, the following conditions must be met) Hardness 100ppm or less, ionized silica 25ppm or less *If the raw water is groundwater, additional pre-treatment may be required. |
Reverse osmosis membrane (R.O.) water purification method |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Youpi Co., Ltd.
View more products of Youpi Co., Ltd.
About Company Handling This Product
- Japan