Product
High -density and high -performance design technology built -in product/image board/analog boardHandling Company
Fuji Soft Co., Ltd.Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Camera power output | Compatible camera | Current consumption current | Encoder | Environmental support | External dimensions | FPGA temperature monitoring | Fpga | General -purpose I/O | Image input I/f | Image input data | Image processing | MEGA-FIFO | On -board memory | POCL | Software (optional) | Supported OS | Synchronous entry | Synchronous output | System bus | interrupt | power supply | usage environment |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
APX-3324A |
Available upon quote | - | - | + 12V | - | Rohs | 167.65mm x 111.15mm, panel width 20mm (not projections) | - | - | - | Cameralink Base Configuration, 4ch SDR26 4 -pin connector, area line camera compatible, sampling clock 85MHz, image data RGB color: 24bit | - | TAP sorting + line reversal | DDR2-SDRAM 512MB | - | Support (Safepower is not compliant) | Development kit: SDK-ACAPLIB2 | WindowsXP/7/10 | External Triga: TTL/Open Collector/Different Signal RS-422, Encoda: Different signal RS-422 (line driver), A/B/Z phase, 1MHz (MAX), general-purpose input: 4ch (photocoupla) | Camera control signal: CC1 ~ CC4, general -purpose output: 8ch, strobe: 4ch (TTL/open collector) | PCI Express2.0 × 4 (5.0GT/S) | Image input start, DMA end, GPIN, etc. | - | Operation temperature: 0 to 50 ° C, humidity: 35-85% (no condensed) | |
APX-3664 |
Available upon quote | Power Over Coaxpress:+24V (13W) x4, * Inside the board+24V voltage generation | - | - | Equipped with RS-422 (line driver), A, B phase, phase 1MHz (MAX), 32-bit counter and 32-bit/16-bit comparison register, one set each (imaging input trigger with comparative register) | - | 190.00mm x 111.15mm, panel width 20mm | can be | - | SDR connector, general -purpose input: 8ch (TTL/open collector, exposure control/synchronous input), general -purpose output: 4ch (TTL/open collector, strobe user output), etc. | COAXPRESS REV1.1, CXP-6QUAD (25Gbit/S) X1, CXP-6Dual (12.5Gbit/S) X2, CXP-6 Single (6.25Gbit/S) X2, etc. | 8, 10, 12 -bit monochrome/RGB | - | - | DDR3 So-Dimm 2GB | - | Development kit: SDK-Transflyer/SDK-ACAPLIB2 | WindowsXP/7/10 | - | - | PCI-Express2.0 × 8 Lane (Gen2), 5.0GT/S | Image input start, DMA end, GPIN, etc. | PCI-Express2.0 × 8 Lane (Gen2), 5.0GT/S | Temperature: 0 to 50 ° C, humidity: 30 to 85% (no duration) | |
APX-3636A |
Available upon quote | External input+12V to+24V generated inside the board | - | - | - | ROHS (E3A), A30C5 | 167.65mm x 111.15mm, panel width 20mm | - | ARRIAV-GX series (Altera) | External trigger / general-purpose input / encoder:+5V-TTL input x8ch, RS422 input x4ch, etc. | COAXPRESS Ver1.1, CXP-3 (3.125Gbps) X1 ~ X6ch, PowerOver+24V (13W) x1 ~ X6ch | - | - | - | DDR3 SDRAM 2Gbyte | - | Development kit: SDK-Transflyer/SDK-ACAPLIB2 | WindowsXP/7/10 | - | - | PCI Express X4 (Gen2), DMA transfer ability 1.6GB/s | Image input start, DMA end, GPIN, etc. | +12V ± 8% (external+12V connector is used (for POCXP)) | Operation temperature: 0 to 50 ° C, humidity: 30 to 85% (no dueling) | |
APX-3800 |
Available upon quote | - | Opt-C: Link | + 12V, 1.0A | - | ROHS compatible | LowProfile 167.65mm x 68.9mm, panel width 20mm (including projections) | - | - | APX-3312 Compatible: 26pin connector | - | - | TAP sorting + line reversal | DDR2-SDRAM 256MB | - | - | Software Development Kit: Acaplibplus | Compatible with WindowsXP/7/10, 32bit/64bit each | - | - | PCI Express 2.0 X8 (Gen2) 2.5GT/S | Image input start, DMA end, GPIN, etc. | - | Temperature: 0 to 50 ° C, humidity: 35-85% (no condensed) |
Click on the part number for more information about each product