Aluminum extruded material dedicated cutting machine multi-angle cutting machine MACM-II
Dydo Co., Ltd.

Double NC control reduces the number of cuts and calls the processed data instantly with a barcode. ■ Cutting angle 30 ° ~ 150 ° optional setting By the servo motor control, it can be cut at an arbitrary angle of 30 to 150 °. For knife feed, you can set the speed and shipping amount under conditions that match the cutting material. ■ Air cut reduction The amount of knife is controlled by a servo motor and can be set arbitrarily. You can reduce unnecessary processes by air cut. ■ Sizing mode (processing work residual length management) The remaining overall length of the material is managed, and the sending range of the material from the work track to the processing stand is automatically controlled so that the knife position matches the predetermined dimensions. ■ Auto gauge mode Control the area with an auto gauge so that it can be processed into a prescribed overall length. ■ Chrome roller By using a high -rigidity chrome roller for the work recipient, the product can be deteriorated from being damaged when transporting. ■ Processing data management Create processing data with a dedicated software and register to the SD card. ■ Barcode production Call the processed data in the SD card with a barcode scan. It eliminates the loss due to input mistakes and contributes to the efficiency of multiple small quantities production. ■ Touch panel The operation of the equipment can be performed with a touch panel, so it is excellent in usability. ■ Safety door Covering the processing unit enhances conservation. It does not work inside the door due to the door closing check mechanism. Chatical scattering can also be deterred. ■ Door damper The door closes slowly by the dumbbar. You can open the safety door at any angle according to the work. Keep the door angle when you release your hands. ■ Area sensor option When the sensor detects a person's approach, the operation of the processing machine is urgently stopped. ■ Automatic clamp Synchronize the processing operation and hold the material. ■ Pipe chuck Options. ■ Cut powder collection BOX equipment Equipped with a cut powder collection BOX on the front and back of the processing machine. You can shorten your daily cleaning up. ■ Oil mist Equipped with an oil function. The blade holding has been greatly improved.