Collective earth leakage detection device LSG-5Y series-LSG-5Y
Collective earth leakage detection device LSG-5Y series-Hikari Shoko Co., Ltd.

Collective earth leakage detection device LSG-5Y series
Hikari Shoko Co., Ltd.


About This Product

■Features -The front lid is made of transparent acrylic resin. ・There are two models: one for 10 circuits and one for 5 circuits. ・Since the detection unit and space unit are plug-in type, it is easy to increase or decrease the number of circuits for both 5 circuits and 10 circuits. ・Unlike the selector method, even if leakage occurs in multiple circuits at the same time, each circuit operates individually. ・Each detection unit has a test switch, so you can test its operation individually. ・The reset method is a manual batch reset method, but individual units can also be reset. - The detection unit and zero-phase current transformer are compatible, so it will operate normally even if the detection unit is replaced. - Sensitivity setting is rotary type 4-point switching. - The filter circuit has been strengthened to handle inverter loads, so it can operate normally even with currents with distorted waveforms (harmonic prevention product). It is also resistant to radio wave interference, noise, and surges. ■Structure The LSG-5Y/10Y series has a recessed case made of steel plate, and the front cover is made of transparent acrylic resin. The power supply is fixed to the case, and the unit is plug-in type. Space unit U-26 is available for unused circuits. For automatic return method, detection unit U-25N or U-32N is available. ■Operation If a leakage occurs in the load side circuit after the zero-phase current transformer is installed, an electromotive force will be generated at the secondary terminal of the zero-phase current transformer. After passing this secondary output through a filter and adjusting its sensitivity, it is amplified by an amplifier circuit, its magnitude is judged by a level detection circuit, and then the output contact is operated by a switching circuit, and at the same time an operation indicator light is lit. After operation, for models with automatic return method, when the leakage is eliminated, the output contact returns and the operation indicator light turns off at the same time. For manual reset type models, the output contact will not reset and the operation indicator will not turn off until the reset switch is pressed. ■Features ・Protects low-voltage circuit equipment from electrical leakage. ・Up to 5 circuits can be detected. ・Please use the required number of detection units. Please use space unit U-26 for unused circuits. ・It is a harmonic countermeasure product. ・Compliant with "JIS C 8374 Earth Leakage Relay".

  • Product

    Collective earth leakage detection device LSG-5Y series

Share this product


30+ people viewing

Last viewed: 21 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Collective earth leakage detection device LSG-5Y series

Product Image Part Number Price (excluding tax) Control power supply voltage Exterior color Frequency Insulation resistance Mass Operating temperature range Output contact configuration Output contact return method Output contact switching capacity Power consumption Power display Return method Usage detection unit Withstand voltage Working voltage range
Collective earth leakage detection device LSG-5Y series-Part Number-LSG-5Y

LSG-5Y

Available upon quote AC100/110V Munsell symbol N1.5 50/60Hz 20MΩ or more with DC500V megger Approximately 2.8kg -20℃~+50℃ Common 1a, each circuit individual 1a Depends on the return method of the detection unit. AC100/200V: 2A (cosφ=1)
AC100/200V: 2A (cosφ=0.4)
DC100V: 0.4A (L/R=1ms)
DC100V: 0.2A (L/R=7ms)
Always 4VA (at AC100V)
Operating 6VA (at AC100V)
Light emitting diode display (green) Manual return method (batch return switch) U-25, U-25N AC2,000V for 1 minute between control circuit conductive part and outer box
AC1,500V for 1 minute between control circuit conductive parts
1,000V AC for 1 minute between open contacts of the same control circuit
AC80~121V

Customers who viewed this product also viewed

Other products of Hikari Shoko Co., Ltd.


View more products of Hikari Shoko Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree