Collective digital earth leakage detection device LSG-205
Hikari Shoko Co., Ltd.
About This Product
■JIS C 8374 earth leakage relay compliant product
Significantly lighter and smaller than conventional models. The LSG-205W allows two-stage detection of light leakage and heavy earth leakage for up to 5 circuits.
■About this product
This product provides earth leakage protection in low-voltage AC power lines and is used in combination with a zero-phase current transformer. If a leakage occurs in the load side circuit after the zero-phase current transformer is installed, an electromotive force will be generated at the secondary terminal of the zero-phase current transformer. This secondary output is compared with an integer value in the detection circuit, and when the operating point is reached, the earth leakage display and output contact operate.
■Measurement display function
You can display the current value and maximum value of the measured value Io of each circuit. The display can be switched manually or automatically using the "circuit changeover" switch. The automatic display automatically switches the current value of each circuit at 5 second intervals.
■Transmission function using EIA-485
Measured values (current value, maximum value), contact information (output contacts), and abnormality information (error display) can be transmitted.
■Others
・Self-diagnosis function
If there is an error with this product, "Err" will be displayed on the measurement display. The “Circuit” indicator light (yellow) for each faulty circuit will flash. It will automatically return when things return to normal.
・Harmonic countermeasure products
・AC/DC shared free power supply
AC corresponds to AC80V to 240V, and DC corresponds to DC80 to 143V.
■Features
・Protects low-voltage circuit equipment from electrical leakage.
・Up to 5 circuits can be detected.
・You can check the current value and maximum value using the measurement display function.
・Uses free power supply.
・It is a harmonic countermeasure product.
・Compliant with "JIS C 8374 Earth Leakage Relay".
-
Product
Collective digital earth leakage detection device LSG-205
-
Handling Company
Hikari Shoko Co., Ltd.
-
Categories
1 Models of Collective digital earth leakage detection device LSG-205
| Product Image | Part Number | Price (excluding tax) | AUTO display | Circuit display | Control power supply voltage | Electric leakage display | Exterior color | Heavy ground fault capacity | Inertial dead time | Insulation resistance | Mass | Maximum value display | Measurement display | Non-operating current | Non-operating power consumption | Number of circuits | Operating power consumption | Operating temperature range | Operating time setting value | Operating time tolerance | Output contact configuration | Output contact switching capacity | Overflow display | Return | Return method | Self-diagnosis display | Sensitivity current setting value | Sensitivity current tolerance range | Test | Withstand voltage | Working voltage range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LSG-205 |
Available upon quote | Light emitting diode display (red) ×1 | Light emitting diode display (yellow) ×5 | AC100~200V 50/60Hz DC100V | Light emitting diode display (red) ×5 | Munsell symbol N1.5 | Continuous AC600A, max. 5,000A, 1.2s | 0.1-0.3-0.5s (0.6s) Apply 10A signal or 20 times the sensitivity value, whichever is greater |
20MΩ or more with DC500V megger Between all electrical circuits and the outer box, between electrical circuits, and between open contacts |
Approximately 0.9kg | Light emitting diode display (red) ×1 |
LED numerical display (orange) 3 digits Measurement range: 0.00~1.20A Accuracy: ±10%±1digit Resolution: 0.01A |
0.05-0.1-0.2-0.3-0.4A (0.5A) |
3.1VA (AC100V) 5.2VA (AC200V) 1.5W (DC100V) |
5 circuits |
6.6VA (AC100V) 9A (AC200V) 3.7W (DC100V) |
-20℃~+50℃ | 0.3-0.5-0.8s (1.0s) When 100% signal is applied |
0.3s tap (0.19~0.33s) 0.5s tap (0.42~0.62s) 0.8s tap (0.72~0.90s) 1.0s tap (0.92~1.10s) |
Common operation/abnormality (1 set of NO contacts) Each circuit individually (1 set of NO contacts) |
AC100/200V: 2A (cosφ=1) DC100V: 0.4A (resistive load) AC100/200V: 2A (cosφ=0.4) DC100V: 0.1A (L/R=7ms) |
Measurement display blinking 1.20A | Each circuit or all at once push button switch method |
Output contact: automatic/manual return (batch setting) Electric leakage display: Manual return |
When an error occurs: Err is displayed on the measurement display (automatic recovery), circuit display (yellow) flashes (automatic recovery) | 0.1-0.2-0.4-0.6-0.8A (1.0A) | 51%~100% | Each circuit, push button switch method |
AC2,000V for 1 minute between all electrical circuits and outer box AC1,500V for 1 minute between electrical circuits AC1,000V for 1 minute between open contacts |
AC80~240V DC80~143V |
Customers who viewed this product also viewed
Other products of Hikari Shoko Co., Ltd.
View more products of Hikari Shoko Co., Ltd.
About Company Handling This Product
- Japan