PFERD Carbide Rotary Bar General -purpose B Series
DKSH Holding Ltd.
About This Product
■ Flame -type carbide rotary bar conforming to DIN 8032
・ The cut eye complies with DIN 8033
・ Faired carbide rotary bars can also be used for any intensity covice material
・ This versatility is realized by high quality standards
■ Advantages
・ Excellent tool performance by high -quality carbide material, various cut shapes, and head shape
・ Improvement of further cutting performance by cutting for specific coating materials
・ Long tool life
・ Suppress shocks and core blur and help a smooth finish
■ Examples of use
・ Bali removal
・ Molded
・ Edge surface/rounded
・ Cutting of welding meat pandeme
・ Casted metal burr off and polished
・ Fix of the shaving material shape
■ About use
・ To maximize the ability of tools to maximize a grinder with an appropriate output
・ Please follow the maximum circumference speed and the maximum number of revolutions.
・ Work can be done at 3,000 rpm or less when working without moving a carbide rotary bar or cutting using all 360 ° blades.
・ If you do not cut a large amount, you can use it with a maximum rotation (excluding long shank carbide rotary bars).
・ Use the low -conductivity covering material within the recommended rotation speed to avoid damage to tools.
・ If the heat is applied too much to the tool, the synchronization part of the shank and the head turns blue. Discolored carbide rotary bars cannot be used
・ Use it with a grinder that can fix the tool firmly.
・ Defeat may occur due to impact or blur when used.
・ It is not possible to use the shank shallowly
・ Generally, at least two -thirds of the shank length length are inserted into the grinder and used.
・ For shank diameter of 6 mm or more, use a 300-500W output grinder when using it at the high -speed rotation speed and the peripheral speed.
・ When using rough products such as cut alu, use 500W grinder is recommended
・ The area of a carbide rotary bar that comes in contact with the coaching material does not exceed 30 % of the total.
・ If you increase the grounding surface any further, there is a risk that the cutting surface will be coarse or the blade will be applied.
・ If you cut in a situation where the grounding surface exceeds 30 %, it is recommended to use a cut toUGH and cut touGhNULLs.
・ Generally, carbide rotary bars move in the opposite direction to the rotation direction of the product.
・ If you cut in the same direction as the rotation direction, you can make a smooth finish.
-
Product
PFERD Carbide Rotary Bar General -purpose B Series
-
Handling Company
DKSH Holding Ltd.
6 Models of PFERD Carbide Rotary Bar General -purpose B Series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of DKSH Holding Ltd.
View more products of DKSH Holding Ltd.
