PFERD Carbide Rotary Bar General -purpose cylindrical Type Maru WRC Series
DKSH Holding Ltd.
About This Product
■ Tip -cylindrical carbide roller bar compliant with DIN 8032
・ The cut eye is compliant with DIN 8033.
・ Fairde carbide rotary bars can also be used for any intensity covering material.
■ Advantages
・ Excellent tool performance by high -quality carbide material, various cut shapes, and head shape
・ Improvement of further cutting performance by cutting for specific coating materials
・ Long tool life
・ Suppress shocks and core blur and help a smooth finish
■ Examples of use
・ Bali removal
・ Molded
・ Edge surface/rounded
・ Cutting of welding meat pandeme
・ Casted metal burr off and polished
・ Fix of the shaving material shape
■ About use
・ To maximize the ability of tools to maximize a grinder with an appropriate output
・ Use by observing maximum circumference speed and maximum rotation speed
・ Work is 3,000 rpm or less when working without moving a carbide rotary bar or cutting using all 360 ° blades.
・ If you do not cut a large amount, you can use it with a maximum rotation (excluding long shank carbide rotary bars).
・ Use low -thermal conductivity such as titanium alloys and stainless steel should be used within the range of recommended revolutions.
・ If the heat is applied too much to the tool, the synchronization part of the shank and the head turns blue. Discolored carbide rotary bars cannot be used
・ Use it with a grinder that can fix the tool firmly.
・ Defeat may occur due to impact or blur when used.
・ Do not use the shank shallowly.
・ Generally, at least two -thirds of the shank length length are inserted into the grinder and used.
・ For the shank diameter of 6 mm or more, use the 300-500W output grinder when using it at the high -speed rotation speed and the peripheral speed.
・ When using rough products such as cut alu, use 500W grinder is recommended
・ Make sure that the area of the carbide rotary bar that comes in contact with the covering material exceeds 30 % of the total.
・ If you cut in a situation where the grounding surface exceeds 30 %, it is recommended to use a cut toUGH and cut touGhNULLs.
・ Generally, carbide rotary bars move in the opposite direction to the rotation direction of the product.
・ If you cut in the same direction as the rotation direction, you can make a smooth finish.
* There are other model numbers.
-
-
Product
PFERD Carbide Rotary Bar General -purpose cylindrical Type Maru WRC Series